R Elevator Hinge Supports and Servo Actuator Fittings Figure 603/TASK 55-20-00-991-003
1EFF : 1 1 1CES ALL 1 111 55-20-00 Page 618 Nov 01/02
Subtask 55-20-00-410-054
B. Visual Inspection
(1) Make sure that the work area is clean and clear of tool(s) and other items.
Subtask 55-20-00-410-055
C. Close Access
(1) Close the access panels 334BB, 334DB, 334FB, 334HB, 335AB, 335BB, 335CB, 335DB and/or 344BB, 344DB, 344FB, 344HB, 345AB, 345BB, 345CB, 345DB. (Ref. TASK 55-13-11-400-001)
Subtask 55-20-00-942-052
D. Remove Ground Equipment
(1) Remove the warning notice(s).
(2) Remove the access platform(s).
Subtask 55-20-00-810-050
E. Remove Locking Devices
R (1) Remove the PIN-SIDE STICK LOCKING from the CAPT and F/O side stick
R controllers.
R (2) Remove the SETTING TOOL-NEUTRAL, ELEVATOR from the elevator.
Subtask 55-20-00-865-055
F. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 19CE1, 19CE2, 19CE3, 15CE1, 15CE2, 16CE1, 16CE2, 21CE1, 21CE2, 21CE3, 22CE:
R
TASK 55-20-00-200-005 Detailed Inspection of Outboard Rib, LH/RH WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE CLEAR.
_______ MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______ CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
CAUTION : DO NOT CAUSE DAMAGE TO THE SURFACES. THE COMPONENTS ARE MADE OF
_______ CARBONFIBER REINFORCED PLASTIC.
1.
Reason for the Job
__________________
Refer to the MPD TASK: 552006-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific 1 ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE No specific 1 WARNING NOTICE 98D27309001000 1 TOOL-ELEVATOR NEUTRAL SETTING 98D27903500000 2 PIN-SIDE STICK LOCKING
R 1EFF : ALL 1 55-20-00Page 620 1 1 May 01/05 1 1 1CES 1
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 11-010 USA TT-I-735 GRADE A
ISOPROPYL ALCOHOL (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
29-10-00-864-001 Depressurize the Green Hydraulic System
29-10-00-864-002 Depressurize the Yellow Hydraulic System
29-10-00-864-003 Depressurize the Blue Hydraulic System
R 55-14-11-400-001 Installation of the Tips 332AB/342AB
R 55-24-11-000-001 Removal of the Elevator Tips and Inboard End Caps. SRM 552100 PB 101 55-20-00-991-004 Fig. 604
3. Job Set-up
__________
Subtask 55-20-00-860-056
A. Aircraft Maintenance Configuration
(1)
Make sure that the elevators are on their lower travel stops.
(2)
Depressurize the green, the yellow and the blue hydralic systems. (Ref. TASK 29-10-00-864-001) (Ref. TASK 29-10-00-864-002) (Ref. TASK 29-10-00-864-003)
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM STABILIZERS 安定面(59)
