R 1EFF : 001-049, 051-060, 101-101, 1 55-12-11Page 601 1 1 May 01/05 1 1 1CES 1

 B. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-10-00-864-001 Depressurize the Green Hydraulic System 29-10-00-864-002 Depressurize the Yellow Hydraulic System 29-10-00-864-003 Depressurize the Blue Hydraulic System
 3. Job Set-up
__________ Subtask 55-12-11-860-051
 A. Depressurize Hydraulic Systems
 (1) Depressurize the Green,Yellow, and Blue hydraulic systems (Ref. TASK 29-10-00-864-001) (Ref. TASK 29-10-00-864-002) (Ref. TASK 29-10-00-864-003).
 Subtask 55-12-11-865-054
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/THS/ACTR/MOT2 19CE2 B09 121VU FLIGHT CONTROLS/THS ACTR/MOT3 19CE3 Q17 121VU FLIGHT CONTROLS/THS ACTR/MOT1 19CE1 Q16
 Subtask 55-12-11-481-051
 C. Install Locking Devices
 (1) Install the PIN-SIDE STICK LOCKING in the CAPT and F/O side stick controllers.
 Subtask 55-12-11-941-051
 D. Safety Precautions
 (1)
 Put the warning notices in the flight compartment to tell persons not to operate the flight controls

 (2)
 Put the warning notices in position to tell persons not to operate the hydraulic systems.

R 1EFF : 001-049, 051-060, 101-101, 1 55-12-11Page 602 1 1 May 01/05 1 1 1CES 1

 (3) Put the access platform in position at zone 334 for the left hand trimmable horizontal stabilizer leading edge and/or zone 344 for the right hand trimmable horizontal stabilizer leading edge.
 4. Procedure
_________ Subtask 55-12-11-210-051
 A. Visual Inspection
 (1) Examine the leading edge sections to make sure that:
 -
there is no distortion

 -
there are no loose screws

 -
there is no damage to the anti-erosion stainless steel covers

 -
there is no damage to the paint finish.
 NOTE : If you find damage, make sure that the damage is within the

____
 limits given in the SRM 55-12-00.

 NOTE : The stainless steel anti-erosion covers are not painted.
____
 5. Close-up
________ Subtask 55-12-11-410-051
 A. Visual Inspection
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 Subtask 55-12-11-942-054
 B. Remove Ground Equipment
 (1) Remove the warning notice(s).
 (2) Remove the access platform(s). Subtask 55-12-11-081-051
 C. Remove Locking Devices
 (1) Remove the PIN-SIDE STICK LOCKING from the CAPT and F/O side stick controllers.
R 1EFF : 001-049, 051-060, 101-101, 1 55-12-11Page 603 1 1 May 01/05 1 1 1CES 1

 Subtask 55-12-11-865-055

 D. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 19CE1, 19CE2, 19CE3
R 1EFF : 001-049, 051-060, 101-101, 1 55-12-11Page 604 1 1 May 01/05 1 1 1CES 1 LEADING EDGE - THS - CLEANING/PAINTING

______________________________________
 TASK 55-12-11-100-001
 Prepare THS LE for Anti-Erosion Protection Application
 WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______ CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE. WARNING : WEAR AND ATTACH A SAFETY HARNESS WHEN YOU WORK ON HIGH SECTIONS. A
_______ FALL CAN INJURE OR KILL YOU.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 WARNING : DO NOT GET THE COMPOUND ON YOUR SKIN.
_______ IF YOU DO:
 -RUB IT OFF IMMEDIATELY WITH A CLEAN CLOTH
 -WASH THE SKIN WITH SOAP AND RINSE WITH CLEAN WATER. CAUTION : DO NOT CAUSE DAMAGE TO THE SURFACES. THE COMPONENTS ARE MADE OF
_______ CARBONFIBER REINFORCED PLASTIC.
 1. Reason for the Job__________________
 To clean the Trimmable Horizontal Stabilizer leading edge and to repair the
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STABILIZERS 安定面(20)