(3)
 Remove the warning notice(s).

 1EFF : ALL 1 32-33-00Page 531 1 1 Aug 01/05R 1 1 1CES 1

 TASK 32-33-00-820-002
 Adjustment of the NLG Free-Fall Extension Mechanical System
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 1. Reason for the Job
__________________
 Self Explanatory
 NOTE : Adjustment of the free-fall system must be made with the aircraft
____
 weight on the landing gear (weight on wheels).

 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific safety barriers
 No specific warning notice
 No specific wedge

R No specific  Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft) 98A27901002000 1 PIN, RIGGING - RUDDER CONTROL 98A32301000000 3 RIGGING PIN
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific  lockwire, corrosion resistant steel, 0.8 mm
 (0.032in) dia

 1EFF : ALL 1 32-33-00Page 532 1 1 May 01/05 1 1 1CES 1

 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 32-00-00-481-001 Installation of the Safety Devices on the Landing Gears 32-00-00-481-002 Installation of the Safety Devices on the Landing
 Gear Doors
R 32-00-00-860-001 Flight Configuration Precautions with Electrical
R Power
R 32-00-00-860-002 Ground Configuration after Flight Configuration with
R Electrical Power 32-22-00-010-001 Nose Gear Doors - Ground Doors Opening 32-22-00-410-001 Nose Gear Doors - Ground Doors Closing 32-33-00-720-001 Functional Check of Free-Fall Extension 32-33-00-820-001 Adjustment of the NLG Free-Fall Extension Cable System 53-12-11-000-001 Removal of the Cockpit Floor Panels from FR1 Thru FR12 53-12-11-400-001 Installation of the Cockpit Floor Panels from FR1 thru FR12 32-33-00-991-011 Fig. 502 32-33-00-991-012 Fig. 503 32-33-00-991-016 Fig. 504
 3. Job Set-up
__________
 (Ref. Fig. 502/TASK 32-33-00-991-011, 504/TASK 32-33-00-991-016)
 Subtask 32-33-00-941-057
 A. Safety Precautions
 (1)
 Put the safety barriers in position.

 (2)
 Make sure that the ground safety locks are on the landing gear (Ref. TASK 32-00-00-481-001).

 (3)
 On the panel 400VU:

 -make sure that the landing-gear control-lever 6GA is in the DOWN position
 -put a warning notice in position to tell persons not to operate the landing gear.
 1EFF : ALL 1 32-33-00Page 533 1 1 Nov 01/04 1 1 1CES 1

 Forward-Fuselage Floor Panels Figure 504/TASK 32-33-00-991-016
 1EFF : 1 1R 1CES  ALL  1 11 1 32-33-00 Page 534 Nov 01/02

 (4) On the panel 110VU, install a wedge each side of GRAVITY GEAR EXTN handle (1), to lock the handle in position.
 Subtask 32-33-00-010-053
 B. Get Access
 (1)
 Open the NLG doors (Ref. TASK 32-22-00-010-001).

 (2)
 Make sure that a SAFETY PIN - NLG DOOR is installed in each NLG door (Ref. TASK 32-00-00-481-002).

 (3)
 Open the lateral avionics-compartment door 822.

 (4)
 Remove the cockpit floor panels 211FF, 211JF (Ref. TASK 53-12-11-000-001).

 (5)
 On the panel 110VU, make sure that the GRAVITY GEAR EXTN handle is folded into the center console.

 Subtask 32-33-00-869-068
 C. Flight Configuration Precautions
 (1)
 If the electrical power is not necessary for other maintenance tasks, de-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002). Then, it is not necessary to operate the LGCIU circuit breakers.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架5(105)