(b)
Put a wedge at each side of the handle (1), to keep it in position and prevent its movement.
Subtask 32-33-00-860-076
M. Aircraft Maintenance Configuration
(1)
Open the NLG doors (Ref. TASK 32-22-00-010-001).
(2)
Make sure that a SAFETY PIN - NLG DOOR is installed in each NLG door.
(3)
Open the MLG doors (Ref. TASK 32-12-00-010-001).
1EFF : ALL 1 32-33-00Page 558 1 1 Aug 01/05R 1 1 1CES 1
(4) Make sure that a GROUND LOCK SLEEVE (460005835) is installed on each MLG door.
Subtask 32-33-00-480-063
N. Installation of the Rigging Pins
(Ref. Fig. 505/TASK 32-33-00-991-013)
(1)
Install the RIGGING PIN (98A27801001000) at position Pin 12 and Pin
1.
(2)
Install the RIGGING PIN (98DNSA20208060) at position Pin 2 and Pin
11.
(3)
Make sure that the related parts are locked. NOTE : If the rigging pins can not be installed, adjust the MLG
____ mechanical system (Ref. TASK 32-33-00-820-004).
(4)
On the panel 110VU:
-lock the GRAVITY GEAR EXTN handle (18) as follows:
(a)
Make sure that the handle (18) is folded into the center console.
(b)
Put a wedge at each side of the handle (18) to keep it in position and prevent its movement.
Subtask 32-33-00-820-075
P. Adjustment of the cables (1) and (2)
(1) Adjust the MLG free-fall cables (1) and (2) again, as specified in paragraph 4. B.
Subtask 32-33-00-820-076
Q. Adjustment of the cables (3) and (4)
(1) Adjust the MLG free-fall cables (3) and (4) again, as specified in paragraph 4. C.
1EFF : ALL 1 32-33-00Page 559 1 1 Aug 01/05R 1 1 1CES 1
Subtask 32-33-00-820-077
R R R. Adjustment of the cables (5) and (6) (Ref. Fig. 509/TASK 32-33-00-991-015, 510/TASK 32-33-00-991-024)
(1) Adjust the MLG free-fall cables (5) and (6) again, as specified in paragraph 4. D.
Subtask 32-33-00-820-078
S. Adjustment of the cables (7) and (8)
(1) Adjust the MLG free-fall cables (7) and (8) again, as specified in paragraph 4. E.
Subtask 32-33-00-820-079
R R T. Adjustment of the cables (9) and (10) (Ref. Fig. 509/TASK 32-33-00-991-015, 510/TASK 32-33-00-991-024)
(1) Adjust the MLG free-fall cables (9) and (10) again, as specified in paragraph 4. F.
Subtask 32-33-00-820-080
U. Adjustment of the cables (11) and (12)
(1) Adjust the MLG free-fall cables (11) and (12) again, as specified in paragraph 4. G.
Subtask 32-33-00-080-060
V. Removal of the Rigging Pins (Ref. Fig. 505/TASK 32-33-00-991-013)
(1) Remove the RIGGING PIN at position Pin 12 and Pin 1.
(2) Remove the RIGGING PIN at position Pin 2 and Pin 11.
(3) On the panel 110VU: - remove the wedges from the GRAVITY GEAR EXTN handle (18).
1EFF : ALL 1 32-33-00Page 560 1 1 Aug 01/05 1 1 1CES 1 Subtask 32-33-00-869-071
W. Ground Configuration
(1) If you did the flight configuration precautions, put the aircraft back to the ground configuration (Ref. TASK 32-00-00-860-002).
**ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
Subtask 32-33-00-410-056
X. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the NLG doors (Ref. TASK 32-22-00-410-001).
(3)
Close the MLG doors (Ref. TASK 32-12-00-410-001).
(4)
Install the cockpit floor panels 211FF, 211JF (Ref. TASK 53-12-11-400-001).
(5)
Install the passenger compartment floor panels 241EF, 242FF (Ref. TASK 53-32-12-400-002).
(6)
Install the forward cargo-compartment ceiling-panels 131AC, 131BC, 131CC.
(7)
Close the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-002).
R **ON A/C 151-199, 401-499,
Subtask 32-33-00-410-056-A
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架5(111)
