(7)
Install the cabin floor panels 242MF, 242LF, 242KF, 241JF, 241KF, 241LF, 241MF (Ref. TASK 53-32-12-400-002).
(8)
Install the rear partition 132PW of the forward cargo-compartment (Ref. TASK 25-54-12-400-001).
(9)
Install the forward cargo-compartment ceiling panels 131AC, 131BC, 131CC.
(10)
Close the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-002).
(11)
Close the avionics-compartment lateral-right door 822 (Ref. TASK 52-41-00-410-002).
(12)
Close the MLG doors (Ref. TASK 32-12-00-410-001).
(13)
Close the NLG doors (Ref. TASK 32-22-00-410-001).
(14)
On the panel 110VU, remove the wedges from the GRAVITY GEAR EXTN handle.
R 1EFF : ALL 1 32-33-00Page 642 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 151-199, 401-499,
Subtask 32-33-00-410-051-A
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the cockpit center-pedestal rear cover.
(3)
Install the cockpit floor panels 211FF, 211JF, 212GF (Ref. TASK 53-12-11-400-001).
(4)
Install the cabin floor panels 221AF, 221DF, 231AF, 231BF (Ref. TASK 53-12-12-400-001).
(5)
Install the cabin floor panel 232LF (Ref. TASK 53-22-12-400-001).
(6)
Install the cabin floor panels 242BF, 242GF, 242FF, 241EF, 241FF (Ref. TASK 53-32-12-400-002).
(7)
Install the cabin floor panels 242MF, 242LF, 242KF, 241JF, 241KF, 241LF, 241MF (Ref. TASK 53-32-12-400-002).
(8)
Install the rear partition 132PW of the forward cargo-compartment (Ref. TASK 25-54-12-400-001).
(9)
Install the forward cargo-compartment ceiling panels 131MC, 131NC.
(10)
Close the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-002).
(11)
Close the avionics-compartment lateral-right door 822 (Ref. TASK 52-41-00-410-002).
(12)
Close the MLG doors (Ref. TASK 32-12-00-410-001).
(13)
Close the NLG doors (Ref. TASK 32-22-00-410-001).
(14)
On the panel 110VU, remove the wedges from the GRAVITY GEAR EXTN handle.
R 1EFF : 151-199, 401-499, 1 32-33-00Page 643 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
Subtask 32-33-00-942-066
B. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the warning notice(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 32-33-00Page 644 1 1 Aug 01/05 1 1 1CES 1 HANDLE ASSEMBLY - FREE FALL CONTROL - REMOVAL/INSTALLATION
__________________________________________________________
TASK 32-33-11-000-001
Removal of the Free-Fall Control-Handle Assembly
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific warning notice(s)
No specific access platform 1.7 m (5 ft. 7 in.)
98A27801001000 1 RIGGING PIN
98A27901002000 1 PIN, RIGGING - RUDDER CONTROL
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
31-35-22-000-001 Removal of the Printer (4TW)
32-00-00-481-001 Installation of the Safety Devices on the Landing
Gears 32-22-00-010-001 Nose Gear Doors - Ground Doors Opening 32-33-11-991-002 Fig. 401 32-33-11-991-001 Fig. 402
1EFF : ALL 1 32-33-11Page 401 1 1 Feb 01/98 1 1 1CES 1
3. Job Set-up
__________
Subtask 32-33-11-941-050
A. Safety Precautions
(1)
In the cockpit, on the panel 400VU put warning notice(s) in position to tell persons not to operate the landing gear control lever.
(2)
Make sure that the ground safety locks are on the landing gear (Ref. TASK 32-00-00-481-001).
Subtask 32-33-11-865-050
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FAC1/28VDC 5CC1 B04 49VU AUTO FLT/FAC1/26VAC 14CC1 B03 121VU AUTO FLT/RUDDER/TRIM/IND 15CC M20 121VU AUTO FLT/FAC2/28VDC 5CC2 M19 121VU AUTO FLT/FAC2/26VAC 14CC2 M18
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架5(133)
