曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 -------------------------------------------------------------------------------
PANEL  DESIGNATION  IDENT. LOCATION
 -------------------------------------------------------------------------------
121VU COM NAV/RADAR/2 121VU COM NAV/RADAR/1 FOR 7DG1 122VU ANTI ICE/WINDOWS/L 122VU ANTI ICE/WHC/1 123VU ANTI ICE/L/WHSLD FOR 7DG2 122VU ANTI ICE/WINDOWS/R 122VU ANTI ICE/WHC/2 123VU ANTI ICE/R/WHSLD  5SQ2 5SQ1 4DG1 5DG1 1DG1 4DG2 5DG2 1DG2  K14K13X14X13AF10W14W13AF03
 Subtask 56-11-12-915-051 
R  C. Adhesive Compound Application (Ref. Fig. 402/TASK 56-11-12-991-024)
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED. 
R R  (1) Clean the retainers (18) and (20) with CLEANING AGENTS (Material No. 11-003) and MISCELLANEOUS (Material No. 19-003). 
R R R  (2) Apply a thin layer of BONDING AND ADHESIVE COMPOUNDS (Material No. 08-018) to the bearing surfaces of the seal (17) on the retainer (20).

 1EFF : 051-099, 1 56-11-12Page 408 1 1 Aug 01/05 1 1 1CES 1

 Subtask 56-11-12-420-058

 D. Assembly of the Fixed Window Assy (Ref. Fig. 402/TASK 56-11-12-991-024)
 (1) Installation of the new seal:
 (a) For the left side, install a new seal (17) on the retainer (20).
 (b) For the right side, install a new seal (17) on the retainer (20).
 (2) Make sure that the holes in the seal (17) are aligned with those in the retainer (20). 
R R  (3) When the seal (17) is installed correctly, use your hand or a roller to push the seal down.
 (4) Carefully remove the unwanted BONDING AND ADHESIVE COMPOUNDS (Material No. 08-018) from the outer and inner edges of the seal (17).
 (5) Apply SPECIAL MATERIALS (Material No. 05-002) in the housing of the window pane (19) on the retainer (20).
 (6) Install the retainers (18) and (20) on the window pane (19).
 (7) Apply SEALANTS (Material No. 09-016) or SEALANTS (Material No. 09-053) in the housings of the bolt heads (15).
 (8) Install the bolts (15) and the nuts (16).
 Subtask 56-11-12-820-051
 E. Adjustment of the Fixed Window (Ref. Fig. 403/TASK 56-11-12-991-026) 
R  (1) Put the window pane (19) in position to get the clearance J5 of 1.4 +0.8 -0.8 mm (0.0551 +0.0314 -0.0314 in.).
 Subtask 56-11-12-420-054
 F. Torque of the Fixed Window Assy Fasteners 
R  (1) TORQUE the nuts (16) to between 0.35 and 0.45 m.daN (30.97 and 39.82 lbf.in).

 1EFF : 051-099, 1 56-11-12Page 409 1 1 Aug 01/05 1 1 1CES 1

R  Fixed Windows (SPS supplier) - Clearances 
R  Figure 403/TASK 56-11-12-991-026 
R 1EFF :  051-099,  1  56-11-12 Page 410 
1  1  May 01/05
 1  1
 1CES  1

 

 Subtask 56-11-12-914-059

 G. Preparation of the Installation of the Fixed Window
 (1) Clean the housing of the window with CLEANING AGENTS (Material No. 11-002) and a MISCELLANEOUS (Material No. 19-003).
 4. Procedure
_________
 Subtask 56-11-12-420-055

 A. Installation of the Fixed Window Panel
 (Ref. Fig. 402/TASK 56-11-12-991-024)

 (1)
 Put the fixed window assy (13) in position in its housing.

 (2)
 Apply SEALANTS (Material No. 09-016) or SEALANTS (Material No. 09-053) in the housings of the heads of the screws (12).

 (3) Install the screws (12).
 Subtask 56-11-12-820-053

 B. Adjustment of the Fixed Window
 (Ref. Fig. 403/TASK 56-11-12-991-026)

R (1) Put the window pane (19) in position to get the clearance J4 of 1.2 +0.8 -0.8 mm (0.0472 +0.0314 -0.0314 in.).
 Subtask 56-11-12-420-056
 C. Torque of the Fixed Window Panel Fasteners (Ref. Fig. 402/TASK 56-11-12-991-024, 403/TASK 56-11-12-991-026)
 (1) TORQUE the screws (12) to between 1.6 and 1.8 m.daN (11.79 and 13.27 lbf.ft).
 Subtask 56-11-12-220-052
 D. Check of the Clearances
 (Ref. Fig. 403/TASK 56-11-12-991-026)

 (1) Make sure that the out-of-flush between the window and the frame is:
 -for A3: 0.6 +0.6 -0.6 mm (0.0236 +0.0236 -0.0236 in.) R - for A4: 0 +0.5 -0.5 mm (0.0000 +0.0196 -0.0196 in.).
 1EFF : 051-099, 1 56-11-12Page 411 1 1 Aug 01/05 1 1 1CES 1

 Subtask 56-11-12-914-057

 E. Sealant Application
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINDOWS 風擋 窗戶(36)