WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 4. Procedure
_________ Subtask 56-22-13-420-051
 A. Installation:
 (1)
 Install the dummy window (4) and the seal (5) in the window frame (6).

 (2)
 Install the retainer (8).

 (3)
 Apply SEALANTS (Material No. 09-018) to the threads of the eyebolts (1).

 (4)
 Install, but do not tighten, the nuts (7) and the nut (3) with the bonding strap (2) on the eyebolts (1) and make sure that:

 (a) The dummy window (4) is in the center of the window frame (6).
 1EFF : 301-399, 1 56-22-13Page 405 1 1 May 01/04 1 1 1CES 1

 (b) The seal (5) is the same width around the full window frame (6).

 (5)
 Torque the nuts (7) and (3) in a diagonal sequence to 0.6 m.daN

 (53.09 lbf.in).

 (6)
 Paint a red 'telltale mark' on the nuts (7) and (3) and the retainer (8).

 5. Close-up
________ Subtask 56-22-13-410-051
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the upper sidewall panels (Ref. TASK 25-23-43-400-001).

 (3)
 Remove the access platform(s).

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : 301-399, 1 56-22-13Page 406 1 1 May 01/04 1 1 1CES 1

 PASSENGER/CREW DOOR WINDOWS - DESCRIPTION AND OPERATION
_______________________________________________________
 1. General
_______ The window provides viewing out of the aircraft, from outside the aircraft and enables the following to be seen:
 -cabin pressurized
 -escape slide armed.
 2. Description
___________ (Ref. Fig. 001, 002) The window consists of a circular seal, inner and outer acrylic glass panes. The components of the window are interchangeable. A hole in the inner pane enables cabin pressure to be maintained in the window. The window assembly is installed in a frame riveted to the outer skin of the door. The window is held in position by a retainer bolted to the frame.
 1EFF : ALL 1 56-31-00Page 1 1 1 Feb 01/98 1 1 1CES 1

 Window - Forward Passenger/Crew Door
 Figure 001
 1EFF :  ALL  1  56-31-00 Page 2 
1  1  Feb 01/98
 1  1
 1CES  1

 Window - Aft Passenger/Crew Door
 Figure 002
 1EFF :  ALL  1  56-31-00 Page 3 
1  1  Feb 01/98
 1  1
 1CES  1

 PASSENGER/CREW DOOR WINDOWS - INSPECTION/CHECK______________________________________________
 TASK 56-31-00-210-001
 Detailed Inspection of the Passenger/Crew Door Windows
 1. Reason for the Job__________________ 
R R  Self Explanatory
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  access platform 3.50 m (11 ft. 6 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-10-00-010-001 52-10-00-410-001 52-10-00-860-001 52-10-00-860-002 56-21-13-100-002 56-31-00-991-002  Opening of the Passenger/Crew DoorClosing of the Passenger/Crew DoorSpecial Precautions before Work on the Passenger/Crew DoorSpecial Precautions after Work on the Passenger/Crew DoorCleaning the Outer Surface of the Outer Window PanesFig. 601
 3. Job Set-up__________
 Subtask 56-31-00-010-050
 A. Get Access 
R R  (1) Put the access platform in position in front of the applicable passenger/crew door at the zone 831 or 841 or 832 or 842.
 (2) Open the applicable passenger/crew door 831 or 841 or 832 or 842 (Ref. TASK 52-10-00-010-001).

 1EFF : ALL 1 56-31-00Page 601 1 1 Nov 01/99 1 1 1CES 1

 (3) Do the special precautions before you start work on the passenger/crew door. (Ref. TASK 52-10-00-860-001)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINDOWS 風擋 窗戶(94)