1EFF : ALL 1 56-12-11Page 205 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 56-12-11Page 401 1 1 May 01/05 1 1 1CES 1

 SLIDING WINDOWS (8DG1,8DG2) - REMOVAL/INSTALLATION__________________________________________________ 
R  **ON A/C 051-099, 
R  TASK 56-12-11-000-001-A 
R  Removal of the Sliding Windows 
R  WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE_______ 
R  OPENED, SAFETIED AND TAGGED. 
R  1. Reason for the Job__________________ 
R  This procedure is applicable to the glass windows (SPS supplier, P/N 
R  SPS...). 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific blanking caps 
R  No specific circuit breaker(s) safety clip(s) 
R  No specific non-metallic scraper 
R  No specific access platform 4.50 m (14 ft. 9 in.) 
R  B. Consumable Materials 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  Material No. 11-003 USA ASTM D 740 
R  METHYL-ETHYL-KETONE (Ref. 20-31-00) 
R  Material No. 19-003 USA AMS 3819 
R  LINT-FREE COTTON CLOTH (Ref. 20-31-00)

R C. Referenced Information

R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R 33-12-12-000-002 R 33-12-18-000-001 R 56-12-11-010-001 R 56-12-11-991-031 R 56-12-11-991-033 R 56-12-11-991-032
R 3. Job Set-up
__________
R Subtask 56-12-11-941-059
R A. Get Access Removal of the Map Table Lights (41LE, 42LE) Removal of the Map Table Light Rheostats (39LE, 40LE) Opening of the Cockpit Sliding Windows Fig. 401 Fig. 402 Fig. 403
R (1) Put the access platform in position at the zone 210 in front of the R sliding window.
R Subtask 56-12-11-865-056
R B. Open, safety and tag this(these) circuit breaker(s):
R -------------------------------------------------------------------------------R PANEL DESIGNATION IDENT. LOCATION R -------------------------------------------------------------------------------R 121VU COM NAV/RADAR/2 5SQ2 K14 R 121VU COM NAV/RADAR/1 5SQ1 K13 R FOR 8DG1 R 122VU ANTI ICE/WINDOWS/L 4DG1 X14 R 122VU ANTI ICE/WHC/1 5DG1 X13 R 123VU ANTI ICE/L/WHSLD 1DG1 AF10 R FOR 8DG2 R 122VU ANTI ICE/WINDOWS/R 4DG2 W14 R 122VU ANTI ICE/WHC/2 5DG2 W13 R 123VU ANTI ICE/R/WHSLD 1DG2 AF03
R 1EFF : 051-099, 1 56-12-11Page 402 1 1 May 01/05 1 1 1CES 1

R Subtask 56-12-11-020-056

R  C. Removal of Component 
R  (1) Remove the map table light installed on the sliding window lining 
R  (Ref. TASK 33-12-12-000-002). 
R  FOR 8DG1 
R  41LE 
R  FOR 8DG2 
R  42LE 
R  (2) Remove the map table light rheostats installed on the sliding window 
R  lining (Ref. TASK 33-12-18-000-001). 
R  FOR 8DG1 
R  39LE 
R  FOR 8DG2 
R  40LE 
R  4. Procedure_________ 
R  Subtask 56-12-11-020-057 
R  A. Removal of the Lining Panels 
R  (Ref. Fig. 401/TASK 56-12-11-991-031, 402/TASK 56-12-11-991-033) 
R  (1) Removal of the lining panel (48) 211GW (212GW) 
R  (a) Remove the screws (41) and the washers (40). 
R  (b) Loosen the fasteners (42). 
R  (c) Disengage the lining panel (48) 211GW (212GW). 
R  (d) Remove the screw (45), the washer (44) and disengage the 
R  electrical cable (46). 
R  (e) Remove the lining panel (48) 211GW (212GW). 
R  (2) Removal of the lining panel (29) 211KC (212KC) 
R  (a) Remove the lining panels (29) 211BC (212BC) and 211FC (212FC). 
R  (b) Loosen the fastener (1). 
R  (c) Remove the screws (24) and the washers (25) from the brackets 
R  (26). 

R 1EFF : 051-099, 1 56-12-11Page 403 1 1 May 01/05 1 1 1CES 1

R  Sliding Windows - Lining Panels 
R  Figure 401/TASK 56-12-11-991-031 
R 1EFF :  051-099,  1  56-12-11 Page 404 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINDOWS 風擋 窗戶(48)