4. Procedure
_________ (Ref. Fig. 801/TASK 56-21-13-991-007) Subtask 56-21-13-020-054
 A. Remove and discard the collar (1) from the pin (2) (Ref. ASRM 51421100).
 (1)
 Remove and discard the pin (2) from the eyebolt (3) and the window frame (4).

 (2)
 Remove and discard the eyebolt (3) from the window frame (4).

 1EFF : ALL 1 56-21-13Page 801 1 1 Feb 01/98 1 1 1CES 1

 Window Frame Eyebolt
 Figure 801/TASK 56-21-13-991-007
 1EFF :  ALL  1  56-21-13 Page 802 
1  1  Feb 01/98
 1  1
 1CES  1

 TASK 56-21-13-400-003

 Installation of the Window Frame Eyebolt
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
Material No. 09-018  USA AMS 3267/3
 CORROSION INHIBITING LOW ADHESION SEALANT
 (Ref. 20-31-00)

R Material No. 11-002  USA MIL-PRF-680 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) (Ref. 20-31-00)
 B. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION  |IPC-CSN
 -------------------------------------------------------------------------------
1 collar 56-21-09 01A-110 2 pin 56-21-09 01A-100 3 eyebolt 56-21-09 01A-090
 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
25-23-43-400-001 Installation of the Upper Sidewall Panel(s)
 56-21-13-400-002 Installation of the Cabin Window
 ASRM 51421100
 56-21-13-991-007 Fig. 801

 1EFF : ALL 1 56-21-13Page 803 1 1 Aug 01/01 1 1 1CES 1

 3. Job Set-up
__________

 Subtask 56-21-13-860-051
 A. Aircraft Maintenance Configuration
 (1) Clean the window frame (4) with CLEANING AGENTS (Material No. 11-002).
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
 SPECIAL MATERIAL.
 THIS MATERIAL IS DANGEROUS.

 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (2) Examine the window frame for good condition.
 4. Procedure
_________
 (Ref. Fig. 801/TASK 56-21-13-991-007) Subtask 56-21-13-420-053
 A. Installation:
 (1)
 Put the new eyebolt (3) in position on the window frame (4). NOTE : The shoulder of the eyebolt (3) must point away from the

____
 window frame (4).

 (2)
 Apply SEALANTS (Material No. 09-018) to the pin (2).

 (3)
 Install the pin (2) through the window frame (4) and the eye of the eyebolt (3).

 (4)
 Install the collar (1) on the pin (2).

 (5)
 Make sure that the pin (2) is correctly installed through the window frame (4) and the eyebolt (3).

 1EFF : ALL 1 56-21-13Page 804 1 1 Feb 01/98 1 1 1CES 1

 (6)
 Make sure that the eyebolt (3) is in the correct position on the window frame (4).

 (7)
 Tighten the collar (1) (Ref. ASRM 51421100).

 5. Close-up
________ Subtask 56-21-13-410-053
 A. Close Access
 (1)
 Install the window assembly (Ref. TASK 56-21-13-400-002).

 (2)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (3)
 Install the upper sidewall panels (Ref. TASK 25-23-43-400-001).

 (4)
 Remove the access platform(s).

 (5)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 56-21-13Page 805 1 1 Feb 01/98 1 1 1CES 1

 CABIN DUMMY WINDOW - DESCRIPTION AND OPERATION
______________________________________________
 1. General_______
 The cabin dummy windows are installed in locations where a cabin window is
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護(hù)手冊 AMM WINDOWS 風(fēng)擋 窗戶(92)