(4)
 Install the washer (2) and the screw (3).

 (5)
 Tighten the screw (3).

 (6)
 Install the blanking plug (4).

 (7)
 Open the sliding window.

 (8)
 Install the guide (13) on the sliding window lining (16) with the washer (14) and the screw (15).

 (9)
 Tighten the screw (15).

 (10)
 Install the washer (8) and the screw (9).

 (11)
 Tighten the screw (9).

 (12)
 Put the handle (6) in position.

 (13)
 Install the washer (20) and the screw (21).
 NOTE : Do not fully tighten the screw (21).

____
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page A400 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 (14)
 Install the washer (18) and the screw (19).

 (15)
 Tighten the screw (19) and (21).

 (16)
 Put the pencil holder assembly (7) in position.

 (17)
 Install the screw (5) and tighten it.

 (18)
 Connect the electrical connector (10).

 (19) Close the sliding window (Ref. TASK 56-12-11-410-001). Subtask 56-12-11-420-069
 B. Installation of Component
 (1)
 Install the map table light (Ref. TASK 33-12-12-400-002). FOR 8DG1 41LE FOR 8DG2 42LE

 (2)
 Install the map table light rheostats (Ref. TASK 33-12-18-400-001). FOR 8DG1 39LE FOR 8DG2 40LE

 Subtask 56-12-11-865-067
 C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1DG1, 4DG1, 5DG1, 1DG2, 4DG2, 5DG2, 5SQ1, 5SQ2.
 Subtask 56-12-11-710-052
 D. Test
 (1) Do the operational test of the anti-icing and defogging of the sliding windows (Ref. TASK 30-42-00-710-001).
 Subtask 56-12-11-110-064
 E. Cleaning of the Sliding Window
 (1) Clean the sliding window (Ref. TASK 56-10-00-110-003).
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page A401 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 Subtask 56-12-11-942-062

 F. Close Access
 (1)
 Close the FWD passenger/crew door (Ref. TASK 52-10-00-410-001).

 (2)
 Remove the access platform(s).

 (3)
 Make sure that the work area is clean and clear of tool(s) and other items.

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page A402 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C ALL

 TASK 56-12-11-000-003 Removal of the Sliding Window Seal WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______
 OPENED, SAFETIED AND TAGGED.

 1. Reason for the Job
__________________
 This procedure is applicable for the glass windows (SPS supplier, P/N SPS...).
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific access platform 4.5 m (14 ft. 9 in.)
 No specific access platform 4.50 m (14 ft. 9 in.)

 B. Referenced Information -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------56-12-11-000-002 Removal of the Sliding Window Panel

R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
 56-12-11-991-020 Fig. 421
 **ON A/C 051-099,

 56-12-11-991-020-A Fig. 421A
 1EFF : ALL 1 56-12-11Page A403 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL

 3. Job Set-up
__________ R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 56-12-11-941-060
 A. Get Access
 (1) Put the access platform in position at the zone 210 in front of the sliding window.
 **ON A/C 051-099,
 Subtask 56-12-11-941-060-A
 A. Get Access
 (1) Put the access platform in position at zone 210 in front of the sliding window.
 **ON A/C ALL
 Subtask 56-12-11-865-076
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
 -------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
 **ON A/C 051-099,
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINDOWS 風擋 窗戶(73)