-
for the right sliding window (8DG2):
retainer (1).
5. Close-up
________
Subtask 56-12-11-420-073
A. Installation of the Sliding Window Panel
(1) Install the sliding window panel into moving frame (Ref. TASK 56-12-11-400-002).
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page A421 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1 SLIDING WINDOWS (8DG1,8DG2) - INSPECTION/CHECK
______________________________________________ R **ON A/C 051-099,
R TASK 56-12-11-200-001-A R Inspection of the Sliding Windows R WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______ R OPENED, SAFETIED AND TAGGED.
R 1. Reason for the Job
__________________
R This procedure is applicable for the glass windows (SPS supplier, P/N R SPS...). R 2. Job Set-up Information
______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific light source
R No specific access platform 4.50 m (14 ft. 9 in.)
R B. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 56-10-00-110-003 R 56-10-00-200-004 R R 56-12-11-010-001 R 56-12-11-410-001 R 56-12-11-991-038 R 56-12-11-991-039 R 56-12-11-991-040 R 56-12-11-991-041 R 56-12-11-991-042 R 56-12-11-991-044 R 56-12-11-991-043 R 56-12-11-991-045 Cleaning of the L/R Sliding Windows Measurement of Scratch Depth with MITUTOYO Surface Tester SJ201 Opening of the Cockpit Sliding Windows Closing of the Cockpit Sliding Windows Fig. 601 Fig. 602 Fig. 603 Fig. 604 Fig. 605 Fig. 606 Fig. 607 Fig. 608
1EFF : ALL 1 56-12-11Page 601 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R 56-12-11-991-082 Fig. 609
R 3. Job Set-up__________
R Subtask 56-12-11-941-064
R A. Get Access
R (1) Put an access platform in position at zone 210.
R (2) Clean the sliding windows (Ref. TASK 56-10-00-110-003).
R (3) Open the sliding windows (Ref. TASK 56-12-11-010-001).
R Subtask 56-12-11-865-070
R B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
R tagged
R -------------------------------------------------------------------------------
R PANEL DESIGNATION IDENT. LOCATION
R -------------------------------------------------------------------------------
R 121VU COM NAV/RADAR/2 5SQ2 K14
R 121VU COM NAV/RADAR/1 5SQ1 K13
R 122VU ANTI ICE/WINDOWS/R 4DG2 W14
R 122VU ANTI ICE/WHC/2 5DG2 W13
R 122VU ANTI ICE/WINDOWS/L 4DG1 X14
R 122VU ANTI ICE/WHC/1 5DG1 X13
R 123VU ANTI ICE/L/WHSLD 1DG1 AF10
R 123VU ANTI ICE/R/WHSLD 1DG2 AF03
R 4. Procedure_________
R Subtask 56-12-11-210-063
R A. Inspection of the Sliding Window Seal
R (1) Make sure that there are no cracks and blisters on the seal.
R (2) Make sure that the surface of the seal that touches the windows is
R not damaged.
R 1EFF : 051-099, 1 56-12-11Page 602 1 1 May 01/05 1 1 1CES 1
R Subtask 56-12-11-220-063
R B. Inspection of the Sliding Windows
R NOTE : "Impaired": in inspection table , the word "impaired" refers to____
R visibility. Visibility is "impaired" when defects have an effect
R on visility.
R If visibility is "impaired", a maintenance action is necessary
R (replacement of the window panel).
R The pilot and maintenance personnel must make a decision about
R when to do this maintenance action.
R (1) Do an inspection of the glass sliding window for:
R (a) Cracks
R (Ref. Fig. 601/TASK 56-12-11-991-038)
R (b) Scratches
R (Ref. Fig. 602/TASK 56-12-11-991-039)
R NOTE : If you see scratches, you must do a check of the depth of____
R the scratches:
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINDOWS 風擋 窗戶(77)
