(4)
 Put the access platform below the applicable wing-tip, zone 534 (634).

 Subtask 57-30-00-865-050
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 15CE1 B11 49VU FLIGHT CONTROLS/SLT/CTL AND MONG/SYS1 5CV B06 105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 16CE2 A02 105VU FLT CTL/ELAC1/STBY SPLY 16CE1 A01 121VU FLIGHT CONTROLS/SLT/CTL/SYS2 7CV R21
 1EFF : ALL 1 57-30-00Page 602 1 1 Feb 01/02R 1 1 1CES 1

 Wing-tip Joint
 Figure 601/TASK 57-30-00-991-001
 1EFF :  ALL  1  57-30-00 Page 603 
1  1  Feb 01/98
 1  1
 1CES  1

 4. Procedure
_________

 (Ref. Fig. 601/TASK 57-30-00-991-001)
 Subtask 57-30-00-110-050 
R R  A. Preparation for Inspection 
R R  (1) Use a MISCELLANEOUS (Material No. 19-003), made moist with CLEANING AGENTS (Material No. 11-026) to clean the wing-tip lower-surface joint area.
 Subtask 57-30-00-210-050
 B. Inspection
 (1) Examine the wing-tip lower-surface joint area, make sure that: - there is no corrosion - there are no cracks - there is no distortion, pulled or damaged fasteners - the paint finish is in the correct condition.
 NOTE : If necessary, refer to the ASRM (Ref. ASRM 573000) for the____ correct repair procedure.
 5. Close-up________
 Subtask 57-30-00-865-051
 A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 15CE1, 16CE1, 16CE2, 5CV, 7CV.
 Subtask 57-30-00-942-050
 B. Removal of Equipment 
R  (1) Remove the safety barriers.
 (2) Make sure that the work area is clean and clear of tool(s) and other items. 
R  (3) Remove the TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER from the flap/slat control lever.
 (4) Remove the access platform(s).

 (5)
 Remove the warning notice(s).

 (6)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 57-30-00Page 605 1 1 Feb 01/02R 1 1 1CES 1

 MAIN STRUCTURE - DEACTIVATION/REACTIVATION
__________________________________________
 TASK 57-31-00-040-001
 Deactivation of the Wing-Tip Fence
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 1. Reason for the Job
__________________
R Refer to the CDL TASK: 57-1 R Wing Tip Fences R Lower part of wing tip fence R Complete wing tip fence
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific safety barriers
 No specific warning notices
 No specific access platform 4 m (13 ft. 1 in.)
 98D27803500001 1 TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 08-061A  D DAN 220
 ALUMINIUM FOIL ADHESIVE TAPE (Ref. 20-31-00)

 Material No. 11-004  USA MIL-T-81533
 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
 (Ref. 20-31-00)

 Material No. 19-003  USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
57-31-22-000-001 Removal of the Wing-Tip Fence 57-31-21-000-001 Removal of the Wing-Tip Structure (for corrective action) 57-31-21-400-001 Installation of the Wing-Tip Structure (for
 corrective action) 57-31-22-000-001 Removal of the Wing-Tip Fence (for corrective action) 57-31-22-400-001 Installation of the Wing-Tip Fence (for corrective
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼2(92)