(2)
Connect the eye end of the spoiler servo control to the applicable spoiler:
-
for the spoiler 2, (Ref. TASK 27-64-42-400-001)
-
for the spoiler 3, (Ref. TASK 27-64-43-400-001)
-
for the spoiler 4, (Ref. TASK 27-64-44-400-001)
-
for the spoiler 5, (Ref. TASK 27-64-45-400-001).
(3)
Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER from the flap/slat control lever.
(4)
Retract the spoilers (Ref. TASK 27-60-00-866-002).
(5)
Retract the flaps (Ref. TASK 27-50-00-866-009).
(6)
Make sure that the applicable spoiler servo-control is in the 'O' (Operation) condition.
Subtask 57-72-00-942-053
C. Removal of Equipment
(1)
Remove the access platform(s).
(2)
Remove the warning notice(s).
(3)
Remove the safety barriers.
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 57-72-00Page 616 1 1 Aug 01/00R 1 1 1CES 1
SKINS AND PLATING - CLEANING/PAINTING_____________________________________
TASK 57-72-11-100-002
Cleaning and Plating of the Spoiler 2
R R R R R CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:_______ - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS. - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS. - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
57-71-11-100-001 Cleaning and Painting of the Spoiler 1
3. Job Set-up__________
Subtask 57-72-11-941-050
A. Not applicable.
4. Procedure_________
R R R R R R CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING_______ EDGE: - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS. - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS. - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
Subtask 57-72-11-110-050
A. The cleaning/painting procedure is the same for all of the spoilers (Ref. TASK 57-71-11-100-001).
SPOILER 3 - DESCRIPTION AND OPERATION
_____________________________________
1. General
_______
(Ref. Fig. 001)
R The spoiler 3 is one of five spoilers which are extended or retracted for these functions:
-roll function
-speedbrake function
-ground spoilers function.
The drive mechanism of the spoilers is electrically controlled (Ref. 27-90-00) and uses hydraulic power to extend or retract the surfaces (Ref. 27-64-00).
R
2. Component Description
_____________________ The spoiler is a wedge-shaped structure. It has carbon fiber top and bottom skins, sides and trailing edge profile, bonded to a honeycomb core. There are four machined aluminum-alloy attachment-fittings. These are the inboard and outboard hinge brackets (with links) the center hinge and the spoiler actuator attachment-fitting. The actuator attachment-fitting installed with the center hinge. The spoiler is attached by the links and the center hinge to the mid rear spar.
A titanium alloy rubbing strip on the trailing edge of the spoiler prevents damage to the spoiler when the flaps are retracted. Seals are installed at the inboard and outboard ends and along the leading edge of the spoiler.
Spoiler 3
Figure 001
1EFF : ALL 1 57-73-00 Page 2
1 1 Feb 01/98
1 1
1CES 1
SKINS AND PLATING - CLEANING/PAINTING
_____________________________________
TASK 57-73-11-100-002
Cleaning and Painting of the Spoiler 3
R R R R R CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:_______ - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS. - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS. - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼5(104)
