(c)
 Loosely install the washer (2) and the bolt (3) in the extension fairing (1).

 (d)
 Find the three black lines on the fixed fairing and put the extension fairing (1) on them.

 (e)
 Loosely install the washers (4) and the bolts (5).

 (f)
 Adjust the extension fairing (1) to be in the black lines.

 (g)
 TORQUE the bolts (3) and (5) to between 0.7 and 0.8 m.daN (61.94 and 70.79 lbf.in).

 (h)
 Apply a thin layer of STORAGE PRESERVATION (Material No. 15-008A) to the heads of the bolts (3) and (5).

 1EFF : 301-399, 1 57-55-11Page 490 1 1 Aug 01/04R 1 1 1CES 1

 INTENTIONALLY BLANK

R 1 1
57-55-11Page 491
1 1 Aug 01/04 1 1 1CES 1

 INTENTIONALLY BLANK

R 1 1
57-55-11Page 492
1 1 Aug 01/04 1 1 1CES 1

R  (2) To install the hinge 1A extension fairing if you have installed a new 
R  fixed fairing. 
R  (a) Use a clean MISCELLANEOUS (Material No. 19-003) made moist with 
R  CLEANING AGENTS (Material No. 11-026) to clean the components 
R  that follow : 
R  - the washers (2) and (4) 
R  - the bolts (3) and (5). 
R  (b) Apply a thin layer of BONDING AND ADHESIVE COMPOUNDS (Material 
R  No. 08-007) to the threads and shank of the bolts (3) and (5). 
R  (c) Loosely install the washer (2) and the bolt (3) in the extension 
R  fairing (1). 
R  (d) Put the extension fairing (1) on the fixed fairing. 
R  (e) Loosely install the washers (4) and the bolts (5). 
R  (f) Adjust the extension fairing and paint three black lines 
R  (Ref. TASK 32-12-14-400-001). 
R  (g) TORQUE the bolts (3) and (5) to between 0.7 and 0.8 m.daN (61.94 
R  and 70.79 lbf.in). 
R  (h) Apply a thin layer of STORAGE PRESERVATION (Material No. 15-008A) 
R  to the heads of the bolts (3) and (5). 
R  Subtask 57-55-11-865-076 
R  C. Remove the safety clip(s) and the tag(s) and close this(these) circuit 
R  breaker(s): 
R  6CV, 8CV 
R  Subtask 57-55-11-860-071 
R  D. Close Access 
R  (1) Make sure that the work area is clean and clear of tool(s) and other 
R  items. 
R  (2) Remove the TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER from the flap/slat 
R  control-lever. 
R  (3) Remove the safety devices and close the MLG doors (Ref. TASK 32-12-
R  00-410-001).

R  5. Close-up________ 
R  Subtask 57-55-11-942-060 
R  A. Removal of Equipment 
R  (1) Remove the access platform(s). 
R  (2) Remove the safety barriers. 
R  (3) Remove the warning notice(s). 
R  (4) Remove the ground support and maintenance equipment, the special and 
R  standard tools and all other items.

R TASK 57-55-11-000-007

R  Removal of the Flap Track 2 Fairing Bracket and Link Assembly 
R  WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______ 
R  START A TASK ON OR NEAR: 
R  - THE FLIGHT CONTROLS 
R  - THE FLIGHT CONTROL SURFACES 
R  - THE LANDING GEAR AND THE RELATED DOORS 
R  - COMPONENTS THAT MOVE. 
R  WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ 
R  GEAR. 
R  1. Reason for the Job__________________ 
R  Self Explanatory 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE  QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific  circuit breaker(s) safety clip(s) 
R  No specific  safety barriers 
R  No specific  warning notices 
R  No specific  adjustable access platform 3.5 m (11 ft. 6 in.) 
R  98D27803500001  1 TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER 
R  B. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼5(76)