Aileron - Upper and Lower Skins - Inspection
 Figure 605/TASK 57-60-00-991-005
 1EFF :  ALL  1  57-60-00 Page 627 
1  1  Aug 01/99
 1  1
 1CES  1

 Subtask 57-60-00-210-054 
R  A. Detailed Visual Inspection of the Aileron Upper and Lower Skins, External Surface
R  (1) Do an inspection of the external surface of the upper and lower skins of the aileron. Make sure that: - there is no damage - there is no delamination at the edges - there is no delamination of the skin - there are no cracks or scores - the surface protection is in the correct condition. 
R R  (2) If necessary, refer to the ASRM (Ref. ASRM 57600000) and/or the CMM (Ref. CMM 576121) for the correct repair procedure. 
R R R R  (3) Do an inspection of the filler between the leading edge and the upper and lower skins of the aileron. Make sure that: - there are no cracks in the filler - there is no missing filler. 
R R  (4) If necessary, refer to the ASRM (Ref. ASRM 576121 PB201) for the correct repair procedure. 
R R  NOTE : The filler repair procedure must be done at the next scheduled____ maintenance interval for the aircraft.
 5. Close-up________
 Subtask 57-60-00-865-059
R  A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5CV, 7CV, 15CE1, 16CE1, 15CE2, 16CE2.
 Subtask 57-60-00-942-055
 B. Removal of the Equipment
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Remove the access platform(s).
 (3) Remove the PIN-SIDE STICK LOCKING from the CAPT and F/O side sticks.

 (4)
 Remove the warning notice(s).

 (5)
 Remove the safety barriers.

R

 SKINS AND PLATING - CLEANING/PAINTING_____________________________________
 TASK 57-61-11-100-001
 Aileron - Cleaning/Painting
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______ START A TASK ON OR NEAR: - THE FLIGHT CONTROLS - THE FLIGHT CONTROL SURFACES - THE LANDING GEAR AND THE RELATED DOORS - COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ GEAR.
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL MATERIALS_______ ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED. 
R R R R R  CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:_______ - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS. - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS. - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 1. Reason for the Job__________________
 Self Explanatory

 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific soft brush No specific vacuum cleaner No specific warning notices No specific wash brush No specific access platform 4 m (13 ft. 1 in.)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-001  USA MIL-D-16791 TYPE I DETERGENT (Ref. 20-31-00)
 Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-75-12-300-001  Repair of Major Paint Damage on Light Alloy and
 Composite Material 51-75-12-300-002 Repair of Major Paint Damage on Steel Component 51-75-12-300-003 Repair of Minor Paint Damage (Topcoat Only) 27-14-41-000-001 Removal of the Aileron (for corrective action) 27-14-41-400-001 Installation of the Aileron (for corrective action)
 1EFF : ALL 1 57-61-11Page 702 1 1 Aug 01/99R 1 1 1CES 1

 3. Job Set-up
__________
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼5(89)