1EFF : ALL 1 57-71-00Page 612 1 1 Aug 01/99R 1 1 1CES 1

 (3) Make sure that the LOCKING TOOL - FLAP/SLAT CONTROL LEVER (98D27803000000) is correctly installed on the flap/slat control lever.
 Subtask 57-71-00-865-059
 C. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
R  49VU FLIGHT CONTROLS/FLP/CTL AND MONG/SYS1 121VU FLIGHT CONTROLS/FLP/CTL AND/MONG/SYS2  6CV 8CV  B07Q21
 4. Procedure_________
 (Ref. Fig. 603/TASK 57-71-00-991-003) 
R R R R R R  CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING_______ EDGE: - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS. - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS. - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 Subtask 57-71-00-110-052
 A. Preparation for Inspection
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (1) Use a MISCELLANEOUS (Material No. 19-003), made moist with CLEANING AGENTS (Material No. 11-004) to clean the spoiler 1 upper and lower skins in these areas: - at the trailing edge - at the inboard and outboard edges.

 Spoiler 1 - Inspection Area
 Figure 603/TASK 57-71-00-991-003
 1EFF :  ALL  1  57-71-00 Page 614 
1  1  Feb 01/98
 1  1
 1CES  1

 Subtask 57-71-00-210-052
 B. Inspection
 (1) Examine the spoiler 1 upper and lower skins at the trailing edge and at the inboard and outboard edges. Make sure that:
 -
there are no cracks

 -
there is no damage

 -
there are no signs of delamination

 -
there is no corrosion at the metal attachment points

 -the protective finish is in the correct condition.
 NOTE : If necessary, refer to the ASRM (Ref. ASRM 577000) for the

____
 correct repair procedure.

 5. Close-up
________ Subtask 57-71-00-865-060
 A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 6CV, 8CV.
 Subtask 57-71-00-860-061
 B. Aircraft Configuration
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Retract the spoilers (Ref. TASK 27-60-00-866-002).

 (3)
 On the servo-control, make sure that the pointer on the hex-head is opposite the letter 'O' (Operation) on the housing.

 Subtask 57-71-00-942-059
 C. Removal of Equipment
 (1)
 Remove the warning notice(s).

 (2)
 Remove the access platform(s).

 (3)
 Remove the safety barriers.

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 57-71-00Page 615 1 1 Aug 01/99R 1 1 1CES 1

 TASK 57-71-00-210-001
 Detailed Visual Inspection of Spoilers 1 to 5, Upper and Lower Skins, External Surface
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______ START A TASK ON OR NEAR: - THE FLIGHT CONTROLS - THE FLIGHT CONTROL SURFACES - THE LANDING GEAR AND THE RELATED DOORS - COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ GEAR. 
R R R R R  CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:_______ - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS. - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS. - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 1. Reason for the Job__________________
 Refer to the MPD TASK: 577009-01
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific No specific No specific No specific 98D27803000000  safety barrierswarning noticesaccess platform 3.5 m (11 ft. 6 in.)access platform 3 m (9 ft. 10 in.)1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼5(95)