Spoiler 2 thru 5 - Inspection Areas
Figure 601/TASK 57-75-00-991-001
1EFF : ALL 1 57-75-00 Page 604
1 1 Feb 01/98
1 1
1CES 1
(1) Use a MISCELLANEOUS (Material No. 19-003), made moist with CLEANING AGENTS (Material No. 11-004) to clean the spoiler upper and lower skins adjacent to the center hinge area.
Subtask 57-75-00-210-050
B. Inspection
(1) Examine the spoiler upper and lower skins adjacent to the center hinge. Make sure that:
-
there are no cracks
-
there is no damage
-
there are no signs of delamination
-
there is no corrosion at the metal attachment points
-the surface protection is in the correct condition.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 577000) for the
____
correct repair procedure.
5. Close-up
________ Subtask 57-75-00-865-052
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 6CV, 8CV.
Subtask 57-75-00-860-051
B. Aircraft Configuration
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Retract the spoilers (Ref. TASK 27-60-00-866-002).
(3)
On the servo-control, make sure that the pointer on the hex-head is opposite the letter 'O' (Operation) on the housing.
Subtask 57-75-00-942-051
C. Removal of Equipment
(1)
Remove the access platform(s).
(2)
Remove the warning notice(s).
1EFF : ALL 1 57-75-00Page 605 1 1 Aug 01/99R 1 1 1CES 1
(3)
Remove the safety barriers.
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 57-75-00Page 606 1 1 Aug 01/99R 1 1 1CES 1
TASK 57-75-00-200-002
Detailed Visual Inspection of Spoiler 5 (Center Hinge Fitting Area)
R R R R R CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:_______ - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS. - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS. - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
57-72-00-200-002
3. Job Set-up
__________ Subtask 57-75-00-941-051
A. Not applicable.
4. Procedure_________
Detailed Visual Inspection of Spoilers 2, 3, 4 and 5 Center Hinge Fittings
R R R R R R CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING_______ EDGE: - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS. - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS. - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
Subtask 57-75-00-210-053
A. Examine the spoiler 5 (Ref. TASK 57-72-00-200-002).
NOTE : The procedure is the same for spoilers 2 thru 5.____
TASK 57-75-00-200-003
Detailed Visual Inspection of the Spoiler 5 (Upper and Lower Skins - Trailing Edge, Inboard Edge and Outboard Edge
R R R R R CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:_______ - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS. - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS. - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼5(107)
