EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-61-02
 ALL  ú ú 01 Page 402 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 C. Speed Sensor N1 Removal
 S 024-005
 (1)  
Do these steps to remove the speed sensor N1 (4):

 (a)  
Disconnect the electrical connector D95018 (P18) (1) from the speed sensor N1 (4).

 (b)  
Remove the two nuts (6) that attach the speed sensor N1 (4) to the load gearbox.

 (c)  
Turn the two screws (5) to loosen the speed sensor N1 (4).

 (d)  
Remove the speed sensor N1 (4).

 (e)  
Remove the two packings (2), (3) from the speed sensor N1 (4). 1) Discard the two packings (2), (3).

 (f)  
Make sure you install all necessary protection covers.

 TASK 49-61-02-404-009
 3.  Speed Sensor N1 Installation (Fig. 401)____________________________
 A. Consumable Materials
 (1)  
D00418 Oil - Aircraft Turbine Engine

 B.
Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 2 | Packing | 49-61-02 | 01 | 28 | | | 3 | Packing | | | 25 | | | 4 | Load Compressor Speed Sensor | | | 33 | | | | (Speed Sensor N1) | | | | 2.......….......…...................................…...........…......….......1

 C.
Access

 (1)  
Location Zones 221 Control Cabin - Left 222 Control Cabin - Right 310 Fuselage - Station 2360 to Station 2792

 (2)  
Access Panels
 317AL APU Access Door - Left
 318AR APU Access Door - Right

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-61-02
 ALL  ú ú 03 Page 403 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400 MAINTENANCE MANUAL
SEE A
SEE B FWD
SPEED SENSOR N1
SEE C

FWD
A
SPEED SENSOR N2 SEE D
FWD
B
Speed Sensor Installation
Figure 401 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-61-02
 ALL  ú ú 01 Page 404 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

1.  ELECTRICAL CONNECTOR, D95018 (P18)
6. NUT (2 LOCATIONS)
5. SCREW
(2 LOCATIONS)

4. SPEED
3.  PACKINGSENSOR N1
2. PACKING LOADFWD GEARBOX
SPEED SENSOR N1 C
11.  NUT (2 LOCATIONS)  7. SPEED SENSOR N2  ACCESSORY GEARBOX 
10.  9. PACKING ELECTRICAL CONNECTOR, D95015 (P15)  FWD 8. SPACER 
SPEED SENSOR N2 
D 

Speed Sensor Installation
Figure 401 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-61-02
 ALL  ú ú 03 Page 405 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L64717
A
747-400 MAINTENANCE MANUAL
 D. Procedure
 S 424-046
 CAUTION: REMOVE THE PROTECTION COVERS FROM THE OPENINGS AS NECESSARY.
_______ IF YOU DO NOT REMOVE THE PROTECTION COVERS, DAMAGE TO THE APU CAN OCCUR.
 (1)  
Do these steps to install the speed sensor N1 (4):

 (a)  
Lubricate the two new packings (2), (3) with a light coat of engine oil.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 機載輔助動力 2(107)