EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-52-06
 ALL  ú ú 03 Page 405 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 D. Access
 (1)  
Location Zones
 221 Control Cabin - Left
 222 Control Cabin - Right
 310 Fuselage - Station 2360 to Station 2792

 (2)  
Access Panels
 317AL APU Access Door - Left
 318AR APU Access Door - Right

 E.
Procedure

 S 034-017
 (1)  
Remove the caps and the plugs from the disconnected tubes, the connectors, and the openings.

 S 434-042

 (2)  
Install the fittings on the diverter valve control (11):

 NOTE: Make sure the diverter valve control that you install has
____ the same part dash number as the rate sensor.
 (a)  Install the packing (16), the new ring (17), the nut (18), and the elbow (19) in the drain outlet (21).
 NOTE: Do not lubricate the packings.
____
 1) Tighten the nut (18) with your fingers.
 (b)  
Install the new packing (12), lubricated with oil, and the reducer (13) in the Pc port (15). 1) Tighten the reducer (13) to 65-75 inch-pounds (7.3-8.5

 newton-meters).

 (c)  
Install the elbow (29): 1) Lubricate the packing (26) with oil. 2) Install the packing (26), the ring (27), the nut (28), and

 the elbow (29) on the test port for the diverter valve
 control (11).
 a) Tighten the elbow (29) with your fingers.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-52-06
 ALL  ú ú 03 Page 406 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (d)  Install the packings (8) and the nipples (7) in the fuel supply port (4) and the fuel return port (9).
 NOTE: Do not lubricate the packings.
____
 1)  Tighten the nipples (7) to 65-75 inch-pounds (7.3-8.5 newton-meters).
 S 434-021
 (3)  
Attach the bracket (2) to the diverter valve control (11) with the bolts (1 and 1A) and the nuts (10).

 (a)  
Tighten the nuts (10) to 36-40 inch-pounds (4.1-4.5
 newton-meters).

 S 424-043
 (4)  Install the diverter valve control (11):
 NOTE: Make sure the diverter valve control that you install has
____
 the same part dash number as the rate sensor.

 (a)  Install the packing (24), on the diverter valve control (11).
 NOTE: Do not lubricate the packing.
____
 (b)  Install the packing (24A), on the adapter (25).
 NOTE: Do not lubricate the packing.
____
 (c)  
Install the adapter (25) on the diverter valve control (11).

 (d)  
Install the bolts (3) that attach the diverter valve
 control (11) to the load compressor case.

 CAUTION: MAKE SURE THE ADAPTER (25) IS ALIGNED WITH THE LOAD
_______ COMPRESSOR CASE. IF THE ADAPTER IS NOT CORRECTLY ALIGNED WITH THE LOAD COMPRESSOR CASE, THE LOAD COMPRESSOR CASE WILL LEAK.
 1)  Tighten the bolts (3) to 36-40 inch-pounds (4.1-4.5 newton-meters).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-52-06
 ALL  ú ú 03 Page 407 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (e)  
Connect the sense line (30) to the elbow (29). 1) Tighten the sense line (30) to 90-100 inch-pounds (10.0-11.0 newton-meters).

 2)  Tighten the nut (28) to 38-42 inch-pounds (3.6-4.0 newton-meters).

 (f)  
Connect the drain line (20) to the elbow (19).

 1)  Tighten the drain line (20) to 270-300 inch-pounds (30.5-33.9 newton-meters).
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 機載輔助動力 2(92)