(b)  
Disconnect the electrical connector D95004 (P4) (5) from the fuel metering unit (1).

 (c)  
Disconnect the fuel pressure tube (6) from the elbow (7).

 (d)  
Drain the fuel from the fuel pressure tube (6) into the container.

 (e)  
Install a cap on the fuel pressure tube (6).

 (f)  
Disconnect the fuel pressure tube (2) from the nipple (3).

 (g)  
Drain the fuel from the fuel pressure tube (2) into the container.

 (h)  
Install a cap on the fuel pressure tube (2).

 (i)  
Remove the four nuts (14), seven washers (12) and four bolts (13) that attach the bracket with its attaching parts and fuel metering unit (1) to the fuel metering adapter.

 (j)  
Remove the fuel metering unit (1).

 (k)  
Remove the two packings (11) from the fuel metering unit (1). 1) Discard the two packings (11).

 (l)  
Remove the elbow (7), nut (8), ring (9) and packing (10). 1) Discard the ring (9) and packing (10).

 (m)  
While you hold the regulator sleeve in position, remove the nipple (3) from the fuel metering unit (1).

 NOTE: Use an open-end wrench on the nut of the regulator
____ sleeve to hold the regulator sleeve in position while you remove the nipple (3).
 (n)  
Remove the packing (4) from the nipple (3). 1) Discard the packing (4).

 (o)  
Make sure you install all necessary protection covers.

 (p)  
Remove the container.

 TASK 49-31-01-404-015
 3. Fuel Metering Unit Installation (Fig. 401)
_______________________________
 A. References
 (1)  AMM 49-11-00/201, Auxiliary Power Unit
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-31-01
 ALL  ú ú 07 Page 403 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

FWD
SEE A
APU COMPARTMENT
1. FUEL
METERING
UNIT

SEE B
FWD
A
Fuel Metering Unit Installation Figure 401 (Sheet 1)
L97330
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-31-01
 ALL  ú ú 04 Page 404 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

BRACKET
1. FUEL
14. NUT METERING
(4 LOCATIONS)  UNIT 2. FUEL PRESSURE TUBE (FROM DIVERTER13. BOLT VALVE CONTROL)(4 LOCATIONS) 3. NIPPLE
12. WASHER (7 LOCATIONS) 4. PACKING
FUEL
METERING
ADAPTER

11.  PACKING (2 LOCATIONS)
10.  PACKING
9. RING
8.  NUT REGULATOR
7. ELBOW SLEEVE
HEAT SHIELD FWD
6. FUEL PRESSURE TUBE
(FROM FLOW DIVIDER
AND DUMP VALVE)

5. ELECTRICAL CONNECTOR, D95004 (P4)
FUEL METERING UNIT
B

Fuel Metering Unit Installation
Figure 401 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-31-01
 ALL  ú ú 05 Page 405 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L97712
A
747-400
MAINTENANCE MANUAL

 B. Consumable Materials
 (1) D00098 Fuel, Turbine Engine - P01-001
 C. Parts ~.............................................................................. | AMM | | AIPC | |................ ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 1 | Fuel Metering Unit | 49-31-01 | 01 | 80 | | | 4 | Packing | 49-31-00 | 01 | 190 | | | 9 | Ring | | | 95 | | | 10 | Packing | | | 100 | | | 11 | Packing | 49-31-02 | 01 | 15 | 2......…........…...................................…..........…......…........1
 D. Access
 (1)  
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 機載輔助動力 2(44)