S 434-022

 (12)
 Install the locking clips in the turnbuckles.

 S 414-053

 (13)
 Install the aft access panel on the left side of the nose wheel well.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-51-31
 ALL  ú ú 03 Page 410 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 STEERING CABLES - INSPECTION/CHECK
__________________________________
 1.  General
 A.  This procedure contains a task to do an inspection of the steering cables.
 TASK 32-51-31-206-001
 2.  Steering Cables Inspection (Table 601)__________________________
 A.  Procedure
 S 216-002
 (1)  
Examine the steering cables for fraying and corrosion.

 S 216-003

 (2)  
Examine the cable seals for deterioration, worn areas, and mounting rings that are not stable.

 S 216-004

 (3)  
Examine the pulley brackets for cracks, distortion, and loose mounting bolts.

 S 216-005

 (4)  
Examine the pulleys and the fairleads for cracks, looseness, and tolerance.

 S 226-006

 (5)  
Examine the cables for specified rigging.

 S 226-007

 (6)  
Examine the steering cables for worn parts (Table 601).

 ~.................................................................. | CABLE | CABLE SIZE | ALLOWABLE PERCENT WEAR OF | | | | OUTER WIRES BEFORE REPLACEMENT | .................................................................... | STEERING CABLES | | | | NWSA, NWSB, NGPPA | 3/32 7x7 | 50 | | and NGPPB | | | 2...................…............….................................1
 Wear Limits of the Steering Cable Table 601
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-51-31
 ALL  ú ú 01 Page 601 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 STEERING WHEEL AND CABLE DRUM - REMOVAL/INSTALLATION
____________________________________________________
 1.  General_______
 A. This procedure contains two tasks:
 (1)  
The removal of the steering wheel and the cable drum.

 (2)  
The installation of the steering wheel and the cable drum.

 TASK 32-51-41-004-001
 2.  Steering Wheel and Cable Drum Removal (Fig. 401)_____________________________________
 A. Standard Tools and Equipment
 (1)  
Cable Tensiometer

 B.
References

 (1)  
AMM 32-00-01/201, Ground Lock Assemblies

 (2)  
AMM 25-21-46/401, Sidewall Panels

 C.
Procedure

 S 494-002
 (1)  
Install the ground locks in the nose landing gear
 (AMM 32-00-01/201).

 S 034-003

 (2)  
Loosen the cable tension at the turnbuckles in cables NWSA and NWSB to get access through the panel 1103.

 S 034-004

 (3)  
Remove the button plug (9) in the steering wheel (1).

 S 034-005

 (4)  
Remove the wheel nut (10).

 S 024-006

 (5)  
Remove the steering wheel (1) and the spacer (7).

 (6)  
Remove the sidewall (3) (AMM 25-21-46/401).

 (7)  
Remove the three screws and the bearing retainer (11).

 (8)  
Remove the cotter key and the shaft nut (18).

 S 034-010

 (9)  
Hold the cable drum (4) and pull out the shaft (17) sufficient to remove the inboard bearing (8) and the spacer (6).

 (a)  
Remove the shaft (17).

 (10)
 Remove the cable drum (4).

 S 034-007
 S 034-008
 S 034-009
 S 024-011
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 起落架 LANDING GEAR 3(133)