(2)
32-00-01/201, Ground Locks
B.
Access
(1)
Location Zone
216 Left Main Wheel Well
217 Right Main Wheel Well
C.
Prepare to Remove the Brake Feel Augmentor
S 494-002
(1)
Make sure that you install the ground locks (Ref 32-00-01/201).
S 494-003
(2)
Put chocks on the wheels and release the parking brake.
S 844-004
(3)
Remove the pressure from hydraulic systems A and B
(Ref 29-15-00/201).
S 844-005
(4)
To remove the hydraulic fluid from the accumulator, operate the brakes fully 12 times or until the brake accumulator gage does not show a pressure drop.
D.
Remove the brake feel augmentor.
S 034-006
(1)
Disconnect the hydraulic line from the brake feel augmentor and put caps on the augmentor port and the hydraulic line.
(2)
Remove the unions and discard the seals.
(3)
Remove the lockwire.
S 024-009
(4)
Remove the jamnut, then remove the brake feel augmentor off the mount.
S 034-007
S 034-008
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-41-97
ALL ú ú 01 Page 401 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
BRAKE FEEL AUGMENTORS ON PRIMARY METERING FLOW
FLOW
VALVES
OVERHEAD FUSE FUSE
AUTOBRAKE SEE A
CONTROL
MODULE
ACCUMULATOR
ALT BRAKE ISOLATION
SELECTOR VALVEANTISKID ANTISKIDVALVE
SHUTTLE
BRAKE METERING SHUTTLE VALVES
VALVE ASSY VALVES
(2 PLACES)
RIGHT LEFT
ALTERNATE PARKING BRAKE LEFT ALTERNATEANTISKID OUTBDSHUTOFF VALVE ANTISKID ANTISKIDCONTROL INBD CONTROL
CONTROL VALVES
AUTOBRAKE
VALVE VALVE
SHUTTLE
BRAKE
FLOW
VALVES BRAKEFUSES
FLOW FUSES
RIGHT ANTISKID
OUTBD
INBD CONTROL VALVES
SERVICING GAGE
ACCUMULATOR WHEEL WELL AFT BULKHEAD
BRAKE PRESS TRANSMITTER
STA 727 BL 0
VIEW LOOKING AFT
BOLT
MOUNT
HYDRAULIC LINE ALTERNATE BRAKE
BOLT
METERING VALVE
PLUNGER BRAKE FEEL AUGMENTOR
CONTROL
QUADRANT SHIM FWDSHAFT INBD
BOLT
LEVER
JAM NUT RETURN
SPRINGAFT WHEEL WELL
BULKHEAD
LEFT INSTALLATION SHOWN, RIGHT SIMILAR
A
Brake Feel Augmentor Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-41-97
ALL ú ú 01 Page 402 ú Mar 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
TASK 32-41-97-404-027
3. Install the Brake Feel Augmentor (Fig. 402)________________________________
A. Standard Tools and Equipment
(1)
Block Gage
B.
Consumable Materials
(1)
D00007 Hydraulic Fluid - BMS 3-11, Fire Resistant
C.
References
(1)
12-12-00/301, Hydraulic Reservoir Servicing
(2)
29-15-00/201, Hydraulic Systems
(3)
32-41-00/201, Hydraulic Brake System
D.
Access
(1)
Location Zone
101 Left Control Cabin
102 Right Control Cabin
216 Left Main Wheel Well
217 Right Main Wheel Well
E.
Install the Brake Feel Augmentor
S 844-011
(1)
Manually move the plunger of the feel augmentor until you fully extend the plunger from the end cap.
S 214-012
(2)
Make sure that the control quadrant is against the stop.
S 214-013 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 起落架 LANDING GEAR 3(45)
