D.  
Prepare for the Test

 S 845-002
 (1)  
Make sure you install the ground locks in the main and the nose landing gears (AMM 32-00-01/201).

 S 845-003

 (2)  
Put the chocks below the wheels.

 (3)  
Release the parking brake.

 S 845-005

 (4)  
Install the pressure gages in the LO and the RI brake lines (LI and RO installations are optional).

 (5)  
Pressurize hydraulic system B (AMM 29-15-00/201).

 (6)
Supply electrical power to the systems (AMM 24-22-00/201).

 S 845-008

 (7)  
Close the circuit breakers that follow on the P6 panel:

 (a)
All the circuit breakers of the antiskid system

 (b)
All the circuit breakers of the landing gear system

 S 845-004
 S 845-006
 S 845-007
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-43-01
 ALL  ú ú 01 Page 501 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (c)  
AUTOBRAKE CONTR (P6-3 panel)

 (d)  
AUTO SPEED BRAKE (P6-2 panel)

 S 845-009
 (8)  
Open the circuit breakers that follow on the P6 panel:

 (a)  
AUTOSLAT NO. 1 AC. (On airplanes with the Digital Stall Warning and Autoslat Computers)

 (b)  
AUTOSLAT NO. 1 DC.

 (c)  
AUTOSLAT NO. 2 AC. (On airplanes with the Digital Stall Warning and Autoslat computers)

 (d)  
AUTOSLAT NO. 2 DC.

 S 845-010
 (9)  
Put the antiskid switch on the P2 panel to the ON position.

 E.
Do the Test on the Automatic Braking System

 S 715-011
 (1)  
Push the AUTOBRAKE DISARM light on the P2 panel and make sure the light comes on.

 S 715-012

 (2)  
Put the Master Dim and Test switch on the P1 panel to the TEST position and make sure the AUTOBRAKE DISARM light comes on.

 S 715-025

 (3)
Put the Master Dim and Test switch back to the BRT position.

 S 715-028

 (4)  
Push and hold the AIR SENSE switch on the E-11 shelf.

 NOTE: Hold the AIR SENSE switch until you are told to release it.
____
 S 715-014
 (5)  
Turn the autobrake selector switch to position 1.

 (a)  
Make sure the AUTOBRAKE DISARM light stays off (monitor for 3 seconds).

 S 715-015
 (6)  
Turn the autobrake selector switch to position 2.

 (a)  
Make sure the AUTOBRAKE DISARM light stays off (monitor for 3 seconds).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-43-01
 ALL  ú ú 01 Page 502 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

CENTER PANEL  CONTROL UNIT 
A  B 
Automatic Braking System Test 
Figure 501 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-43-01
 ALL  ú ú 01 Page 503 ú Mar 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 S 715-026
 (7)  
Turn the autobrake selector switch to position 3.

 (a)  
Make sure the AUTOBRAKE DISARM light stays off (monitor for 3 seconds).

 S 715-027
 (8)  
Turn the autobrake selector switch to the MAX position.

 (a)  
Make sure the AUTOBRAKE DISARM light stays off (monitor for 3 seconds).
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 起落架 LANDING GEAR 3(80)