曝光臺(tái) 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

3-Req Lower
4-Land at KOAK
5-Land at KSMF
If you need to declare an emergency, press 1. If you would like to request a higher or lower
altitude, press 2 or 3. If you want to land at one of your alternates or return to your departure
airport, press 4 or 5.
No Approach Controller
If there is no Approach controller, you will still be talking to Center. When it is applicable,
you may be asked to contact Tower. When it is time, option 1 will be available.
1-Tower on 125.50
2-Missed App
3-Req IAP App
4-Req Visual App
5-Lv Freq to get Wx
If you need to declare a missed approach, choose option 2. If you want to request a specific
IAP approach, then choose option 3. If you would like a visual approach, press option 4. If
you need a current weather report, choose option 5.
1-Land at KSFO
2-Cancel IFR
4-EMERGENCY
5-Req Higher
If you need to land at one of your alternates due to weather, choose option 1. If you want to
cancel IFR, press 2. If you have an emergency, press 4. If you want a higher altitude, press 5.
1-Req Lower
2-Land at KOAK
3-Land at KSMF
4-NOTAM on Course
5-Change Dest
If you want a lower altitude, press option 1. If you want to land at one of your alternates or
return to your departure airport, press 2 or 3. If you missed approach and are going to an
Radar Contact Radar Contact User Interface
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 128
alternate, and the arrival airport has NOTAMs selected, you will need to declare yourself on
course when you are clear of terrain and on course.
1-Altimeter ck
If you need the current altimeter reading, press 1.
Tower
When you have been switched to Tower, and have landed, option 1 to contact Ground will be
available.
1-Ground on 125.50
2-Missed App
3-Req IAP App
4-Wind Check
5-Field in Sight
Press 1 to contact Ground when told to. Press 2 to declare a missed approach. If you want to
request a specific IAP approach, choose option 3. If you want an updated wind report, press
4. If you have requested a visual approach and the field is in sight, press option 5.
1-Cancel IFR
If you want to cancel your IFR, press option 1.
No Tower Controller
If there is no Tower controller, option 1 will be available when it is appropriate.
1-Ground on 125.50
2-Missed App
3-Req IAP App
4-Wind Check
5-Field in Sight
Press 1 to contact Ground, when told to. Press 2 to declare a missed approach. If you want to
request a specific IAP approach, choose option 3. If you want an updated wind report, press
4. If you have requested a visual approach, and the field is in sight, press option 5.
1-Cancel IFR
Radar Contact Radar Contact User Interface
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 129
If you want to cancel your IFR, press option 1.
Ground
Once Ground has cleared you of the active runway, you have two ways to end Radar Contact.
2-Flight Critique
3-END Radar Contact
Choose option 2 if you want a blunt assessment of your flight. You can choose option 3 if
you want to end Radar Contact.
No Ground Controller
If there is no Ground controller, you have two ways to end Radar Contact.
2-Flight Critique
3-END Radar Contact
Choose option 2 if you want a blunt assessment of your flight. You can choose option 3 if
you want to end Radar Contact.
Co-pilot Usage
As in previous versions of Radar Contact, you will have a co-pilot at your side to help you
out. However, if you would like another co-pilot feel free to change it on the voices screen.
The co-pilot can take over all communications, all the flying, or both communications and
flying from you, if you wish.
If you want the copilot on comms, press CS-K (which is default - but perhaps you have
changed your key preferences, in which case it would be another key combination). The
copilot will take over from this moment on, maintaining all communications with all
controllers.
At any time, while the copilot has the comms it is possible for you to override him. If you
want to ask clearance for a higher flight level, it is perfectly possible to do so. Likewise for
requesting a weather report, declaring an emergency, or any other type of communication you
would like to have. The copilot will restrict himself to acknowledging all comms from the
different controllers to your aircraft, including setting the transponder.
The default key combination to make the copilot fly the plane is CS-M. Remember that the
autopilot has to be engaged and slaved to both heading and altitude. Otherwise, the copilot
will not be able to fly. If the plane does not have the MS autopilot capability, the RC co-pilot
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料15(110)