曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

country directory (\winwood\123 - no files, \winwood\Elbonia - chatter files)
 Follow the rules for adding center specific chatter (above), and add the chatter
directories and files to the \Elbonia directory
When the wav files are placed in the appropriate folder they must be added to the existing
wavs numbering scheme or have a new one started in the case of a previous blank folder. An
excellent program to accomplish this is CKRename Version 1.06.
This simple program has three main frames, DIRECTORY, EXISTING FILENAME, AND
FILENAME PREVIEW. First, select which folder(s) the new wav files have been added,
example USA-APP. All of the existing wav files and the new ones will be listed in the second
frame (EXISTING FILENAME). Below the 3 frames are several instruction boxes (Change
Filename, Auto Number, Change Extension, Change Case, and File Mask). Let‟s proceed
with the 4 steps to make the changes.
First, under the Change Filename we “tick” the box Replace and then add the name (in our
example) [app] in the box (DO NOT TYPE THE BRACKETS). The file names will
automatically change in the third frame FILENAME PREVIEW.
Second, go to the Auto Number Section, then “tick” the after button and place a 1 in both the
Start At box and the Increment Box and 0 in the Zero Fill Box.
Third, go the Change Extension and Change Sections, then “tick” the None button in both
sections. Leave the File Mask box with a *.* in the window.
Fourth go up to the File menu and select Rename, this will change all the names in the
FINENAME PREVIEW, to “app1-100+ in consecutive order.
You would follow the same procedure for each category, app, atc1, atc2, atc3, cd, dep gnd,
and twr that you have new wav files for.
Radar Contact Advanced Users
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 134
Running Radar Contact on a Networked Machine Using WideFS.
By John Burgess
In my experience, RC works even better when run on a second machine using WideFS. The
menus respond more quickly and changes (such as turning RC chatter on and off or requesting
change of destination) can be made „on the fly‟ without pausing or losing focus from FS.
The following notes assume that you already have a network set up and WideFS installed and
working. They hopefully cover all the issues you need to know about to get RC up and
running on the second machine.
 You need all the RC files, including any chatter you wish to use, installed on the
second machine. You can achieve this either by copying the files across from the
main machine or by performing a fresh install on the second machine. In either case,
you will need to apply for a new key to run RC on the second machine. If you only
intend using RC on the second machine, you do not need it installed on your main
machine.
 The second machine must be able to play sound since the RC voices will play on it.
 The keystrokes for RC will still be entered on the main machine.
 When you start RC, you have to load a flight plan or an APL file. The sharing options
for the folder where you store these flight plans must be set to full. This is because
RC must be able to write to this folder. If you do not do this you will encounter a „run
time error‟ when trying to leave the „controllers‟ page. The same must be true of the
folder in which you save RC flights if, for some reason, you wish this to be on your
main machine.
 If you want the RC menus to appear on the second machine you can use the
'ShowText' utility which is part of Pete Dowson's AdvDisplay. ShowText should be
installed on the second machine and details of its use are given in the documentation
that comes with it.
 With the latest versions of FSUIPC it is no longer necessary to have AdvDisplay
installed on your main FS machine; the display window built into FSUIPC has taken
over the required functions.
 If you wish to suppress the window that appears on your main FS machine you must
assign a hot key to close it via FSUIPC. For registered FSUIPC users this can be done
on the hotkeys page of the FSUIPC options and settings menu. Depending on your
version it is either 'Toggle FS Display Window on/off ' or 'Toggle AdvDisplay
Window on/off '.
 Non registered FSUIPC users can set up the hotkey by including a line such
as AdvDisplayHotKey=65,11 in the FSUIPC.ini file. Details of this method are given
in the FSUIPC 'manual for advanced users' under 'Other Options'.
Radar Contact Advanced Users
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 135
 If everything works well please remember to let Pete know how much you appreciate
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料15(113)