D.
Procedure
(1)
Install the ground locks in all landing gear (AMM 09-11-00/201).
S 864-022
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-22
ALL ú ú 01 Page 403 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 494-023
WARNING:_______ YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO INSTALL
THE DOOR LOCKS ON THE LANDING GEAR DOORS. THE DOORS CAN CLOSE
QUICKLY IF YOU DO NOT INSTALL THE DOOR LOCKS CORRECTLY. THIS
CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(2)
Do this task: "Installation of the Door Locks on the Wing Landing Gear" (AMM 32-00-30/201).
S 494-028
(3)
Do this task: "Installation of the Door Locks on the Body Landing Gear" (AMM 32-00-30/201).
S 224-012
(4)
Do a check for the wear limits of the attach points (AMM 32-11-22/601).
S 644-025
(5)
Lubricate the washer surfaces, the shank, and the threads of the bolt (which attaches the universal to the positioning link), with grease.
S 434-014
(6)
Connect the universal to the positioning link with pin and end caps.
(a)
Attach with the bolt, the flat washer, and the nut.
(b)
Tighten the nut and install the cotter pin.
S 644-015
(7) Lubricate the washers, the shank, and the threads of the bolt (which attaches the positioning link to the bellcrank), with grease.
S 434-016
CAUTION:_______YOU MUST INSTALL THE BOLT AS SHOWN IN FIGURE 401. THE INCORRECT INSTALLATION OF THE BOLT CAN CAUSE THE BOLT HEAD TO TOUCH THE OTHER PARTS.
(8)
Set the link until you can align the holes in the bellcrank with the spherical bearing.
(a)
Install the pin, and add the end cap.
(b)
Attach with the bolt, the washer, and the nut.
(c)
Tighten the nut and install the cotter pin.
S 644-017
(9) Lubricate the tang washer, the shank, and the threads of the bolt, (which attaches the universal to the truck beam), with grease.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-22
ALL ú ú 01 Page 404 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 434-018
CAUTION:_______YOU MUST INSTALL THE BOLT AS SHOWN IN FIGURE 401. THE INCORRECT INSTALLATION OF THE BOLT CAN CAUSE A PROBLEM WHEN THE GEAR RETRACTS.
(10)
Align the holes in the universal and the truck beam.
(a)
Insert the bolt, the tang washer and the self-locking nut.
(b)
Tighten the nut 300 to 420 pound-inches.
S 094-024
WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO REMOVE THE
_______ DOOR LOCKS FROM THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT REMOVE THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(11)
Do this task: "Removal of the Door Locks from the Wing Landing Gear" (AMM 32-00-30/201).
S 094-029
(12)
Do this task: "Removal of the Door Locks from the Body Landing Gear" (AMM 32-00-30/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-22
ALL ú ú 01 Page 405 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
WING GEAR TRUCK POSITIONING LINK - INSPECTION/CHECK
___________________________________________________
1. General_______
A. This procedure has two tasks:
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 2(45)
