C.
Procedure
S 026-002
(1)
Remove the mechanical lock assembly and pushrod (Ref 20-11-01/401, 32-11-23/401).
S 226-003
(2)
Examine the truck mechanical lock assembly for worn areas.
(a)
Measure the parts at the locations shown in figure 601.
(b)
Compare the measured dimensions to the wear limits in figure
601.
(c)
If a part is not in tolerance, replace the part if you cannot repair it.
S 426-004
(3) Do this task: "The Truck Mechanical Lock Installation on the Wing Landing Gear (Ref 32-11-23/401).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-23
ALL ú ú 01 Page 601 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEEA
SIDE STRUT
1. FRAME
SPINDLE
SHOCK STRUT
SEE B
5. ROLLER SUPPORT
2. PUSHROD
UPPER
TORSION 3. LEVER
4. HOOKLINK
FWD A
Wing Gear Truck Mechanical Lock Wear Limits
Figure 601 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-23
ALL ú ú 01 Page 602 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
Wing Gear Truck Mechanical Lock Wear Limits
Figure 601 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-23
ALL ú ú 01 Page 603 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
FRAME
BEARING/BUSHING
BUSHING/BUSHING
CLEARANCES
D-D
Wing Gear Truck Mechanical Lock Wear Limits
Figure 601 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-23
ALL ú ú 01 Page 604 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
NO. INDEX PART NAME DIM. DESIGN LIMITS WEAR LIMITS WORN PART REPLACE PART WORN REPAIR INSTR. REPAIR
DIAMETER DIM. ALLOWED WEAR 10 ANCE MAX CLEAR-DIAM
MIN MAX
1 BEARING ID 0.3120 0.3125 0.3140 0.0030 X
BOLT OD 0.3110 0.3120 0.3095 X
2 LINK 1 0.438 0.440 0.450 0.018 X
BEARING 2 0.432 0.437 0.422 X
3 BUSHING ID 0.5000 0.5008 0.5022 0.0034 X
PUSHROD OD 0.4988 0.4996 0.4974 X
4 BEARING ID 0.3120 0.3125 0.3136 0.0026 X
BOLT OD 0.3110 0.3120 0.3099 X
5 BUSHING ID 0.3130 0.3270 0.3280 0.0170 X
BOLT OD 0.3110 0.3120 0.3100 X
6 BUSHING 3 0.438 0.440 0.441 0.009 X
BEARING 2 0.432 0.437 0.431 X
7 BUSHING ID 1.1260 1.1280 1.1301 0.0066 X
HOOK OD 1.1235 1.1250 1.1214 X 9
8 BUSHING ID 0.6260 0.6280 0.6296 0.0056 X
HOOK OD 0.6240 0.6250 0.6224 X 9
9 HOOK 4 2.750 2.760 2.763 0.026 X 9
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 2(52)
