曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 B.  To do this procedure, you must remove the outboard door on the wheel well on the wing landing gear.
 TASK 32-12-01-206-001
 2.  The Outboard Door Inspection on the Wheel Well of the Wing Landing Gear_______________________________________________________________________ (Fig. 601)
 A.  References
 (1)  
32-12-01/401, Wing Gear Wheel Well Outboard Door

 (2)  
IPC 32-12-01 Fig. 2, IPC 32-12-08 Fig. 1

 B.  
Access

 (1)  
Location Zone
 732 Wing Landing Gear Door, LH
 742 Wing Landing Gear Door, RH

 C.  
Procedure

 S 026-002
 (1)  
Do this task: "The Outboard Door Removal on the Wheel Well of the Wing Landing Gear" (Ref 32-12-01/401).

 S 226-003

 (2)  
Examine the outboard door hinge and linkage rod bolts and bushings for corrosion and damage.

 (a)  
Measure the parts at the locations shown in figure 601.

 (b)  
Compare the measured dimensions to the wear limits on figure

 601.

 (c)  
If a part is not in tolerance, replace the part if you cannot repair it.

 S 426-004
 (3)  Do this task: "The Outboard door Installation on the Wheel Well of the Wing Landing Gear" (Ref 32-12-01/401).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-12-01
 ALL  ú ú 01 Page 601 ú Oct 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

Wing Gear Wheel Well Outboard Door Wear Limits
Figure 601 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-12-01
 ALL  ú ú 01 Page 602 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

6. BUSHING/BOLT  RADIUS ROD

Wing Gear Wheel Well Outboard Door Wear Limits
Figure 601 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-12-01
 ALL  ú ú 01 Page 603 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

NO. INDEX  PART NAME  DIM.  DESIGN LIMITS  WEAR LIMITS  WORN PART REPLACE  PART WORN REPAIR  INSTR. REPAIR 
DIAMETER  MITTED PER-DIM. WEAR *[7]  ANCE MAX CLEAR-DIAM 
MIN  MAX 
1  BUSHING  ID  0.3140  0.3180  0.3320  0.020  *[1] 
BOLT  OD  0.3115  0.3120  0.2940  X 
2  BUSHING  ID  0.3140  0.3180  0.3320  0.020  *[1] 
BOLT  OD  0.3115  0.3120  0.2940  X 
3  BUSHING  ID  0.3140  0.3180  0.3320  0.020  *[1] 
BOLT  OD  0.3115  0.3120  0.2940  X 
4  BUSHING  ID  0.3140  0.3180  0.3320  0.020  *[1] 
BOLT  OD  0.3115  0.3120  0.2940  X 
5  BUSHING  ID  0.4375  0.4390  0.4570  0.020  *[2] 
BOLT  OD  0.4360  0.4370  0.4175  X 
6  BUSHING  ID  0.6875  0.6890  0.6965  0.010  *[3] 
BUSHING  OD  0.6855  0.6865  0.6775  X 
7  BUSHING  ID  0.3125  0.3140  0.3320  0.020  *[4] 
BOLT  OD  0.3110  0.3120  0.2925  X 
8  BUSHING  ID  0.5625  0.5640  0.5710  0.010  *[5] 
BUSHING  OD  0.5600  0.5610  0.5525  X 
9  BEARING  ID  0.3120  0.3125  0.3320  *[6] 0.020 OR  X 
BOLT  OD  0.3110  0.3120  0.2920 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 2(97)