|-------------|----------------------------------|----------------------------|
| Panel FIN | Belly Fairing Missing Fasteners | |
| | Description | |
|-------------|----------------------------------|----------------------------|
R | | are installed on all corner | |
R | | areas of each panel (count from| |
R | | the corner). | |
R | | | |
R | | At panels with sealing profiles: | |
R | | One fastener at every fourth | |
R | | fastener position is permitted | |
R | | missing, only if in accordance | |
R | | with the subsequent condition: | |
R | | - that a minimum of four | |
R | | fasteners of the first fastener| |
R | | positions are installed on all | |
R | | corner areas of each panel | |
R | | (count from the corner). | |
R |-------------|----------------------------------|----------------------------|
R | 191BT/192BT | (Ref. Fig. 603/TASK 53-35-00-991-| Replace the missing |
R | 191CT/192CT | 006-001) | fasteners before 10 flight |
R | | 1 - Missing fasteners are not | cycles |
R | | permitted in the corner areas| |
R | | 2 - Three missing fasteners are | |
R | | permitted when two fasteners | |
R | | are installed at each side of| |
R | | an empty hole. | |
R | | 3 - One missing fastener is | |
R | | permitted. | |
R | | 4 - Two missing fasteners are | |
R | | permitted when they are not | |
R | | adjacent to each other. | |
R |-------------|----------------------------------|----------------------------|
**ON A/C ALL
5. Close-up________
Subtask 53-35-00-410-051
A. Close Access
(1) Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
(2) Remove the access platform(s).
EFF : ALL
53-35-00Page 617
May 01/04
(3) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF : ALL
53-35-00Page 618
R TASK 53-35-00-220-001
R Inspection of the Vanes of the Belly-Fairing Louver-Panels
R 1. Reason for the Job__________________
R Refer to the CDL TASK: TBD
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific 1 ACCESS PLATFORM 1M (3 FT)
R B. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 29-10-00-864-001 Depressurize the Green Hydraulic System
R 29-10-00-864-002 Depressurize the Yellow Hydraulic System
R 29-10-00-864-003 Depressurize the Blue Hydraulic System
R 32-12-00-010-001 Open the Main Gear Doors for Access
R 32-12-00-410-001 Close the Main Gear Doors after Access
R CDL 53-01
R 53-35-13-000-004 Removal of the Louver Panel - Panel 147FB (148FB)
R (for corrective action)
R 3. Job Set-up__________
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(107)
