(d)
Repair the dents which are in the limits (Ref. TASK 51-73-11-300-003).
(e)
For damage that is more than the limits for minor damage, refer to the ASRM (Ref. ASRM 53-31-11-201) for the correct repair data.
R EFF : 001-049, 051-099, 101-149, 151-199, 53-31-00Page A675 201-299, 401-499, Aug 01/05
CES
Inspection Areas of the Fuselage Cutouts of the Emergency Exits Figure 633/TASK 53-31-00-991-057
R EFF : 001-049, 051-099, 101-149, 201-299, 53-31-00Page A676 May 01/05
CES
Inspection Areas of the Fuselage Cutouts of the Emergency Exits Figure 633A/TASK 53-31-00-991-057-A
R EFF : 151-199, 401-499, 53-31-00Page A677 Aug 01/05
CES
(3)
If you find corrosion:
(a)
Refer to the ASRM (Ref. ASRM 51-22-00-001) for the general corrosion data.
(b)
Repair the corroded areas (Ref. TASK 51-74-11-300-001) or (Ref. TASK 51-74-11-300-002), as necessary.
(4)
If you find damage to the surface protection:
(a)
Refer to the ASRM (Ref. ASRM 51-23-11-001) for the general data about the paint coating of the aircraft.
(b)
Repair the damage to the paint system (Ref. TASK 51-75-12-300-001) or (Ref. TASK 51-75-12-300-003), as necessary.
5. Close-up
________ Subtask 53-31-00-410-096
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the LH and the RH emergency-exit hatches (Ref. TASK 52-21-11-400-001).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R EFF : 001-049, 051-099, 101-149, 151-199, 53-31-00Page A678 201-299, 401-499, Aug 01/05
CES
R **ON A/C ALL
TASK 53-31-00-210-035
General Visual Inspection of Upper Skin of Longitudinal Lap Joints and Crack Stopper Areas at STGR6 LH/RH, between FR35(FR35.8) and FR47, External Surface
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE CLEAR.
_______ MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE.
WARNING : WEAR AND ATTACH A SAFETY HARNESS WHEN YOU WORK ON HIGH SECTIONS. A
_______ FALL CAN INJURE OR KILL YOU.
1. Reason for the Job
__________________
Refer to the MPD TASK: 533124-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 ACCESS PLATFORM 8M (26 FT) - ADJUSTABLE
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-73-11-300-001 Repair of Minor Damage on Aluminum Clad Components 51-73-11-300-003 Repair of Dents in Skin Panels 51-73-11-300-004 Repair of Minor Damage on Unclad Components 51-74-11-300-001 Repair of Corroded Areas 51-74-11-300-002 Removal of the Corrosion on Unpainted Light Alloy 51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and
Composite Material
51-75-12-300-003 Repair of Minor Paint Damage (Topcoat Only)
ASRM 51-11-00-001
ASRM 51-22-00-001
ASRM 51-23-11-001
ASRM 53-31-11-101
ASRM 53-31-11-201 (for corrective action)
**ON A/C 001-049, 051-099, 101-149, 201-299,
53-31-00-991-058 Fig. 634
R **ON A/C 151-199, 401-499,
53-31-00-991-058-A Fig. 634A
**ON A/C 301-399,
53-31-00-991-058-B Fig. 634B
**ON A/C ALL
3. Job Set-up
__________
Subtask 53-31-00-941-063
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(87)
