3. Job Set-up
__________
Subtask 53-31-00-010-073
A. Get Access
(1) Put the warning notice in position to tell persons not to operate the flight controls.
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION
_______
BEFORE YOU START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
(2)
Put the access platform in position adjacent to FR47.
(3)
Clean the inspection area with CLEANING AGENTS (Material No. 11-002) and a lint-free cloth.
4. Procedure
_________
(Ref. Fig. 617/TASK 53-31-00-991-019) Subtask 53-31-00-210-068
A. Inspection
(1) Examine the external surface of the skin in the circumferential splice and stringer coupling area at FR47, from STGR10 to the crown centerline, for cracks.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-31-11-101) for
____
the correct repair procedure.
5. Close-up
________ Subtask 53-31-00-410-071
A. Close Access
(1)
Remove the access platform(s).
(2)
Remove the warning notice(s).
EFF : ALL
53-31-00Page 683
May 01/04
R
CES
Circumferential Skin Splice at FR47 Figure 617/TASK 53-31-00-991-019
R EFF : CES ALL 53-31-00 Page 684 May 01/04
(3) Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
EFF : ALL
53-31-00Page 685
May 01/04
R
CES TASK 53-31-00-210-020
Detailed Visual Inspection of Visible Part of Window Forgings and Fuselage Skin in Window Forging Area, between FR35 and FR47, LH/RH, External Surface
1. Reason for the Job
__________________
Refer to the MPD TASK: 533132-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific lint-free cloth No specific warning notice No specific access platform 3.8 m (12 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-002 USA MIL-PRF-680 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
ASRM 53-31-11-101 (for corrective action) 53-31-00-991-020 Fig. 618 53-31-00-991-023 Fig. 619
EFF : ALL
53-31-00Page 686
May 01/04
R
CES 3. Job Set-up
__________
Subtask 53-31-00-010-074
A. Get Access
(1) Put the warning notice in position to tell persons not to operate the flight controls.
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION
_______ BEFORE YOU START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
(2)
Put the access platform in position.
(3)
Carefully clean the window forgings with CLEANING AGENTS (Material No. 11-002) and a lint-free cloth.
4. Procedure
_________
(Ref. Fig. 618/TASK 53-31-00-991-020, 619/TASK 53-31-00-991-023) R **ON A/C 001-049, 051-099, 101-149, 201-299,
Subtask 53-31-00-210-069
A. Inspection
(1) Examine the external surface of the window forgings and the fuselage skin in thewindow forging area between FR35 thru FR47, for cracks.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-31-11-101) for
____
the correct repair procedure.
EFF : ALL
53-31-00Page 687
Window Forgings FR35 thru FR47 Figure 618/TASK 53-31-00-991-020
R EFF : CES ALL 53-31-00 Page 688 May 01/04
Window Forgings - Allowable Damage Figure 619/TASK 53-31-00-991-023 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(64)
