(2)
Install the belly-fairing access panels 197BB and 197GB (Ref. TASK 53-35-13-400-001) (Ref. TASK 53-35-13-400-002).
(3)
Remove the warning notice(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
**ON A/C 301-399,
Subtask 53-41-00-410-079-A
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the belly-fairing access panels 197KB and 197GB (Ref. TASK 53-35-13-400-001) (Ref. TASK 53-35-13-400-002).
(3)
Remove the warning notice(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-41-00Page 640
**ON A/C ALL
TASK 53-41-00-210-010
Detailed Visual Inspection of AFT Passengers/Crew Door Cutout Upper Corners including Skin and Internally the Visible Portion of the Internal Doubler
1.
Reason for the Job
__________________
Refer to the MPD TASK: 534132-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific lint-free cloth
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
25-80-00-000-001 Removal of the Insulation Blankets
25-80-00-400-001 Installation of the Insulation Blankets
ASRM 53-41-11-101 (for corrective action)
53-41-00-991-012 Fig. 609
EFF : ALL
53-41-00Page 641
3. Job Set-up
__________
Subtask 53-41-00-010-082-A
A. Get Access
(1)
Remove the door linings 261UW, 261VW, 262UW, 262VW.
(2)
Remove the insulation blankets from the inspection area (Ref. TASK 25-80-00-000-001).
NOTE : Identify the insulation blankets for installation.
____
(3) Clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
THIS MATERIAL IS DANGEROUS.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
4. Procedure
_________
(Ref. Fig. 609/TASK 53-41-00-991-012) Subtask 53-41-00-210-067
A. Inspection
(1) Examine the top corners of the aft passenger/crew door-cutout, fuselage skin and internal doubler for cracks.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-101) for
____
the correct repair procedure.
EFF : ALL
53-41-00Page 642
May 01/04
R
CES
Top Corners of the Aft Passenger/Crew Door-Cutout, Fuselage Skin and Internal Doubler Figure 609/TASK 53-41-00-991-012
EFF : ALL
53-41-00Page 643
May 01/04 R CES
5. Close-up
________ Subtask 53-41-00-410-081-A
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the insulation blankets (Ref. TASK 25-80-00-400-001).
(3)
Install the door frame linings 261UW, 261VW, 262UW, 262VW.
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-41-00Page 644
May 01/04
R
CES TASK 53-41-00-210-011
Detailed Visual Inspection of Frame Splices and Adjacent Area from FR53 to FR56 located above Stringer 18 RH
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(144)
