(1)
Do a detailed inspection of the structure of the frame splices at STGR35, left side. This inspection is applicable from FR24 to FR34.
(2)
Make sure that there is no :
(a)
Corrosion damage :
-If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types of corrosion, inspection, removal and corrosion protection.
(b)
Other damage (cracks, scratches, stress, marks, dents, bumps,...):
-If you find this type of damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
Inspection of the Splices at STGR35 in the Forward Cargo Compartment Figure 618/TASK 53-21-00-991-012
R EFF : ALL 53-21-00Page 699 May 01/05
CES 5. Close-up
________
**ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
Subtask 53-21-00-410-066
A. Installation of the Components
(1)
Install the insulation blankets of the floor panels 131BF, 131FF, 131JF (Ref. TASK 25-80-00-400-001).
(2)
Install the cargo floor panels 131BF, 131FF, 131JF (Ref. TASK 53-22-14-400-001).
R **ON A/C 151-199, 401-499,
Subtask 53-21-00-410-066-A
A. Installation of the Components
(1)
Install the insulation blankets of the floor panels 131BF and 131DG (Ref. TASK 25-80-00-400-001).
(2)
Install the cargo floor panels 131BF and 131DG (Ref. TASK 53-22-14-400-001).
**ON A/C ALL
Subtask 53-21-00-942-082
B. Close access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-002).
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
TASK 53-21-00-200-013
Detailed Inspection of Fuselage Internal Structure between FR 24 and FR 35, Including Forward Face of Pressure Bulkhead, from Stringer 38 LH/RH to botto...
1. Reason for the Job
__________________
Refer to the MPD TASK: 532180-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 2.00 m (6 ft. 7 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific masking paper
Material No. 08-074
MASKING TAPE (Ref. 20-31-00)
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-006 AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-007 AIB TN 10138 TYPE II GRADE 1 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-008 AIB TN 10138 TYPE II GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
R EFF : 001-049, 051-099, 101-149, 151-199, 53-21-00Page A601 201-299, 401-499, Aug 01/05
CES -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump 53-22-14-000-001 Removal of the FWD Cargo-Compartment Floor-Panels 53-22-14-400-001 Installation of the FWD Cargo-Compartment
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(3)
