(4)
If you find damage to the surface protection:
(a)
Refer to the ASRM (Ref. ASRM 51-23-11-001) for the general data about the paint coating of the aircraft.
(b)
Repair the damage to the paint system (Ref. TASK 51-75-12-300-001) or (Ref. TASK 51-75-12-300-003), as necessary.
R **ON A/C 301-399,
R Subtask 53-31-00-210-084-B
R A. Inspection Procedure
R (1) Do a general visual inspection of the external surfaces of the upper
R skins of the longitudinal lap joints and the crack stopper areas. Do
R this at STGR6 LH/RH, between FR35.8 and FR47:
R (a) Look for scratches, dents, cracks, corrosion and damage to the
R surface protection.
R (2) If you find scratches, dents and/or cracks:
R (a) Refer to the ASRM (Ref. ASRM 51-11-00-001) for the classification
R of the damage.
R (b) Refer to the ASRM (Ref. ASRM 53-31-11-101) for the allowable
R damage limits for this structure.
R (c) Repair the scratches which are in the limits (Ref. TASK 51-73-11-
R 300-001) or (Ref. TASK 51-73-11-300-004), as necessary.
R (d) Repair the dents which are in the limits (Ref. TASK 51-73-11-300-
R 003).
R (e) For damage that is more than the limits for minor damage, refer
R to the ASRM (Ref. ASRM 53-31-11-201) for the correct repair data.
R (3) If you find corrosion:
R (a) Refer to the ASRM (Ref. ASRM 51-22-00-001) for the general
R corrosion data.
R (b) Repair the corroded areas (Ref. TASK 51-74-11-300-001) or
R (Ref. TASK 51-74-11-300-002), as necessary.
R (4) If you find damage to the surface protection:
R (a) Refer to the ASRM (Ref. ASRM 51-23-11-001) for the general data
R about the paint coating of the aircraft.
R (b) Repair the damage to the paint system (Ref. TASK 51-75-12-300-
R 001) or (Ref. TASK 51-75-12-300-003), as necessary.
CES **ON A/C ALL
5. Close-up
________ Subtask 53-31-00-942-076
A. Remove the Ground Support Equipment
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the access platform(s).
TASK 53-31-00-210-036
General Visual Inspection of Upper Skin of Longitudinal Lap Joints and Crack Stopper Areas at STGR18 LH/RH, between FR35(FR35.8) and FR47, External Surface
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE CLEAR.
_______ MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE.
WARNING : WEAR AND ATTACH A SAFETY HARNESS WHEN YOU WORK ON HIGH SECTIONS. A
_______ FALL CAN INJURE OR KILL YOU.
1. Reason for the Job
__________________
Refer to the MPD TASK: 533125-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
EFF : ALL 53-31-00Page A689
May 01/04
R
CES
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-73-11-300-001 Repair of Minor Damage on Aluminum Clad Components 51-73-11-300-003 Repair of Dents in Skin Panels 51-73-11-300-004 Repair of Minor Damage on Unclad Components 51-74-11-300-001 Repair of Corroded Areas 51-74-11-300-002 Removal of the Corrosion on Unpainted Light Alloy 51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(89)
