May 01/05
R
 CES  -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------

SRM 511100 P.Block 001 (for corrective action) SRM 512200 P.Block 001 (for corrective action) 53-21-00-991-038 Fig. 636
 3. Job Set-up
__________
 Subtask 53-21-00-010-081
 A. Get Access
 (1)
 Put an access platform in position at the forward cargo compartment door.

 (2)
 Open the forward cargo compartment door 825 (Ref. TASK 52-30-00-860-001).

 (3)
 Remove the sidewall panels 131QW, 131RW, 132QW, 132RW (Ref. TASK 25-54-12-000-003).

 (4)
 Remove the insulation blankets (Ref. TASK 25-80-00-000-001).

 Subtask 53-21-00-110-085
 B. Cleaning of the Structure
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
 (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
 EFF : 301-399, 53-21-00Page A693

May 01/05
R
 CES  4. Procedure

_________ Subtask 53-21-00-220-078
 A. Inspection
 (Ref. Fig. 636/TASK 53-21-00-991-038)

 (1)
 Do a detailed inspection of the attachment area of FR35.1 and FR35.2A to the cabin floor beams, left and right sides.

 (2)
 Make sure that there is no:

 (a)
 Corrosion damage:

 -If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types of corrosion, inspection, removal and corrosion protection.

 (b)
 Other damage (cracks, scratches, stress, marks, dents, bumps,...):

 -If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
 5. Close-up
________ Subtask 53-21-00-410-079
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the insulation blankets (Ref. TASK 25-80-00-400-001).

 (3)
 Install the sidewall panels 131QW, 131RW, 132QW, 132RW (Ref. TASK 25-54-12-400-003).

 (4)
 Close the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-002).

 (5)
 Remove the access platform(s).

 Attachment Area of FR35.1 and FR35.2A to the Cabin Floor Beams
 Figure 636/TASK 53-21-00-991-038

 CES

R **ON A/C 151-199, 401-499,

 TASK 53-21-00-200-026
 Detailed Inspection of Skin of Circumferential Joint at FR 35, between Stringer 10 LH and Stringer 10 RH, External Side
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 532188-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  access platform 4.00 m (13 ft. 1 in.)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533
 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
 (Ref. 20-31-00)
 Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
SRM 511100 P.Block 001 (for corrective action) SRM 512200 P.Block 001 (for corrective action) 53-21-00-991-044 Fig. 637

 3. Job Set-up
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(25)