EFF : ALL
53-41-00Page 605

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-45-000-003 Removal of the Door Frame Linings at the Left AFT Passenger/Crew Door 25-23-45-000-004 Removal of the Door Frame Linings at the Right AFT Passenger/Crew Door 25-23-45-400-005 Installation of the Door Frame Linings at the Right AFT Passenger/Crew Door 25-23-45-400-008 Installation of the Door Frame Linings at the Left
 AFT Passenger/Crew Door 25-33-41-000-001 Removal of the AFT Galley Unit (6480MM) 25-33-41-000-002 Removal of the AFT Galley Unit (6481MM or 6483MM) 25-33-41-400-001 Installation of the AFT Galley Unit (6480MM) 25-33-41-400-002 Installation of the AFT Galley Unit (6481MM or
 6483MM)
 25-43-41-000-001 Removal of the Lavatory D
 25-43-41-400-001 Installation of the Lavatory D
 25-43-42-000-001 Removal of the Lavatory E
 25-43-42-400-001 Installation of the Lavatory E
 25-43-43-000-001 Removal of the Lavatory F
 25-43-43-400-001 Installation of the Lavatory F

R  25-43-44-000-001 Removal of the Lavatory H (Design Lav.L)
R  25-43-44-400-001 Installation of the Lavatory H (Design Lav.L) 25-80-00-000-001 Removal of the Insulation Blankets 25-80-00-400-001 Installation of the Insulation Blankets 51-75-13-916-001 Repair to a layer of Moisture-Removing Oil ASRM 53-41-11-001 (for corrective action) 53-41-00-991-004 Fig. 602
 3. Job Set-up
__________
 Subtask 53-41-00-010-070
 A. Get Access
 (1)
 Remove the AFT lavatories as necessary (Ref. TASK 25-43-41-000-001), (Ref. TASK 25-43-42-000-001), (Ref. TASK 25-43-43-000-001), (Ref. TASK 25-43-44-000-001).

 (2)
 Remove the AFT galleys as necessary (Ref. TASK 25-33-41-000-001), (Ref. TASK 25-33-41-000-002).

 EFF : ALL
53-41-00Page 606

 (3) Remove the door frame linings (Ref. TASK 25-23-45-000-003) (Ref. TASK 25-23-45-000-004).
 (4) Remove the insulation blankets from the inspection area (Ref. TASK 25-80-00-000-001).
 NOTE : Identify the insulation blankets for installation.____
 Subtask 53-41-00-110-059
 B. Clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE SPECIAL_______ MATERIAL. THIS MATERIAL IS DANGEROUS.
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 4. Procedure_________
 (Ref. Fig. 602/TASK 53-41-00-991-004)
 Subtask 53-41-00-210-056
 A. Inspection 
R R R R  (1) Examine the internal structure around the aft passenger/crew door above cabin floor level. Do this between FR65 and FR69 and between stringer 6 and stringer 23, LH/RH and look for: - corrosion, - skin distortion. 
R R  NOTE : The door entrance area between FR66 and FR68, between stringer____ 22 and stringer 23, LH/RH is not examined in this procedure. 
R

 EFF : ALL
53-41-00Page 607
Nov 01/04

 Internal Structure around the Aft Passenger/Crew Door-Cutouts
 Figure 602/TASK 53-41-00-991-004

 EFF : ALL
53-41-00Page 608

Feb 01/98
 CES R (2) If necessary, refer to the ASRM (Ref. ASRM 53-41-11-001) for the R correct repair procedure.

 5. Close-up
________
 Subtask 53-41-00-916-050
 A. Apply STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the inspection area (Ref. TASK 51-75-13-916-001) .
 Subtask 53-41-00-410-071
 B. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the insulation blankets (Ref. TASK 25-80-00-400-001).

 (3)
 Install the door frame linings (Ref. TASK 25-23-45-400-008) (Ref. TASK 25-23-45-400-005).

 (4)
 Install the AFT lavatories as necessary (Ref. TASK 25-43-41-400-001), (Ref. TASK 25-43-42-400-001), (Ref. TASK 25-43-43-400-001), (Ref. TASK 25-43-44-400-001).

 (5)
 Install the AFT galleys as necessary (Ref. TASK 25-33-41-400-001), (Ref. TASK 25-33-41-400-002).

 (6)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(136)