EFF : ALL
53-41-00Page 4
Aug 01/04
MAIN STRUCTURE - INSPECTION/CHECK
_________________________________
TASK 53-41-00-210-002
Detailed Visual Inspection of Skin around ADF-2 Antenna Cutout between FR48 and FR49 and between Stringers 1 LH/RH, External Surface (Optional)
1.
Reason for the Job
__________________
Refer to the MPD TASK: 534111-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific lint-free cloth
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
34-53-11-000-001 Removal of the ADF Loop and Sense Antenna
34-53-11-400-001 Installation of the ADF Loop and Sense Antenna
ASRM 53-41-11-101 (for corrective action)
53-41-00-991-003 Fig. 601
EFF : ALL
53-41-00Page 601
3. Job Set-up
__________
Subtask 53-41-00-010-074
A. Get Access
(1) Remove the ADF 2 antenna (Ref. TASK 34-53-11-000-001). WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
THIS MATERIAL IS DANGEROUS.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(2) Clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
4. Procedure
_________ (Ref. Fig. 601/TASK 53-41-00-991-003) Subtask 53-41-00-210-057 R A. Inspection
(1) Examine the skin cutout of the ADF 2 antenna for:
-corrosion,
-cracks, R NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-101) for
____
the correct repair procedure.
EFF : ALL
53-41-00Page 602
R Skin Cutout of the ADF 2 Antenna Figure 601/TASK 53-41-00-991-003
EFF : ALL 53-41-00 Page 603 Aug 01/03
CES
5. Close-up
________ Subtask 53-41-00-410-073
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the ADF 2 antenna (Ref. TASK 34-53-11-400-001).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-41-00Page 604
TASK 53-41-00-210-003
R R Detailed Visual Inspection of Internal Structure around AFT Passenger/Crew Door above Cabin Floor between FR65 and FR69 and from STGR6 to STGR23, LH/RH
1. Reason for the Job__________________
Refer to the MPD TASK: 534135-01
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific lint-free cloth
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R Material No. 11-003 Material No. 15-005 Material No. 15-006 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(135)
