-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
ASRM 53-46-11-101 (for corrective action)
53-41-00-991-008 Fig. 605
3. Job Set-up
__________
Subtask 53-41-00-010-115
A. Get Access
(1) Put the access platform in position at the AFT cargo-compartment door.
R (2) If installed, remove the rear additional center tank (Ref. AMM R 28-11-27, Page Block 401).
R (3) Carefully clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
4. Procedure
_________
(Ref. Fig. 605/TASK 53-41-00-991-008)
Subtask 53-41-00-210-060
A. Inspection
(1) Examine the hinge fittings and external attachment at the AFT cargo-compartment door for:
-cracks,
-corrosion.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-46-11-101) for
____
the correct repair procedure.
(2)
Remove the access platform(s).
(3)
Open the AFT cargo-compartment door (Ref. TASK 52-30-00-860-001) or (Ref. TASK 52-30-00-860-003).
(4)
Put the access platform in position.
EFF : ALL
53-41-00Page 622
Hinge Fittings at the AFT Cargo-Compartment Door Figure 605/TASK 53-41-00-991-008
R EFF : CES ALL 53-41-00 Page 623 Feb 01/00
Subtask 53-41-00-865-050
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU HYDRAULIC/HYD POWER/Y 3803GX N30 122VU DOORS/CARGO 1MJ T12 123VU Y HYD/ELEC/PUMP 3802GX AB06
Subtask 53-41-00-110-063
C. Carefully clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
Subtask 53-41-00-210-061
D. Examine the hinge fittings at the AFT cargo-compartment door for:
-cracks,
-corrosion,
-loose or missing rivets,
-broken lugs.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-46-11-101) for the
____
correct repair procedure.
5. Close-up
________
Subtask 53-41-00-865-051
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 3803GX, 1MJ, 3802GX
Subtask 53-41-00-410-112
B. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
R (2) If removed, install the rear additional center tank (Ref. AMM R 28-11-27, Page Block 401).
R (3) Remove the access platform(s).
EFF : ALL
53-41-00Page 624
R (4) Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002) or
(Ref. TASK 52-30-00-860-004).
R (5) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-41-00Page 625
R **ON A/C 001-049, 051-099, 101-149, 221-221, 224-224, 228-228,
TASK 53-41-00-210-007 Detailed Visual Inspection of Fuselage Skin under Bulk Cargo Door Scuff Plate
1.
Reason for the Job
__________________
Refer to the MPD TASK: 534169-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3 m (9 ft. 10 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(140)
