(4)
Remove the access platform(s).
(5)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
FAIRINGS - WING TO FUSELAGE - REMOVAL/INSTALLATION
__________________________________________________
TASK 53-25-11-000-001
Removal of the Wing-to-Fuselage Fairings (191AT, 191AB, 192AT, 192AB)
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific access platform 3.5 m (11 ft. 6 in.)
B. Referenced Information -------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
27-80-00-866-004 Extending the Slats on the Ground
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
53-25-11-991-001 Fig. 401
**ON A/C 301-399,
53-25-11-991-001-A Fig. 401A
EFF : ALL
53-25-11Page 401
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
53-25-11-991-002 Fig. 402
**ON A/C 301-399,
53-25-11-991-002-A Fig. 402A
**ON A/C ALL
53-25-11-991-003 Fig. 403
3. Job Set-up__________
Subtask 53-25-11-865-050
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AIR COND/RAM/AIR/INLET 1HZ D10 106VU CSM/G /EV/MAN/SPLY 6XE B04
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
R 122VU AIR COND/PACK TEMP/CTL SYS1/2/115VAC 122VU AIR COND/PACK TEMP/CTL SYS1/2/28VDC 122VU AIR COND/PACK TEMP/CTL SYS1/1/115VAC 122VU AIR COND/PACK TEMP/CTL SYS1/1/28VDC 122VU AIR COND/PACK TEMP CTL SYS2/2/28VDC 122VU AIR COND/PACK TEMP CTL SYS2/2/115VAC 21HH 23HH 1HH 3HH 24HH 22HH W22W21X22X21Y21Y20
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
R 122VU AIR COND/PACK TEMP CTL SYS2/1/28VDC 4HH Y19
EFF : ALL
53-25-11Page 402
R -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------**ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
R R 122VU AIR COND/PACK TEMP CTL SYS2/1/115VAC **ON A/C 106-149, 303-399, 2HH Y18
R 122VU 4HH Y19
**ON A/C ALL
Subtask 53-25-11-869-052
B. Aircraft Maintenance Configuration (1) Make sure that the slats are extended (Ref. TASK 27-80-00-866-004). Subtask 53-25-11-010-050
C. Get Access
(1) Put the access platform in position in the zones 191 and 192. 4. Procedure_________ Subtask 53-25-11-020-051
R A. Removal of the Fairing-Wing to Fuselage **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 401/TASK 53-25-11-991-001) **ON A/C 301-399,
(Ref. Fig. 401A/TASK 53-25-11-991-001-A)
EFF : ALL
53-25-11Page 403
Fairing - Left Access Panels Figure 401/TASK 53-25-11-991-001
R EFF : 001-049, 051-099, 101-149, 151-199, 201-299, 401-499, 53-25-11 Page 404 Aug 01/05
CES
R R Fairing - Left Access Panels Figure 401A/TASK 53-25-11-991-001-A
R EFF : 301-399, 53-25-11 Page 405 May 01/04
CES
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 402/TASK 53-25-11-991-002)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(33)
