Subtask 53-21-00-941-075
 A. Get Access
 (1) Put an access platform in position at the zone 200.
 Subtask 53-21-00-110-091
 B. Cleaning of the Structure
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
 4. Procedure
_________
 Subtask 53-21-00-220-081
 A. Inspection
 (Ref. Fig. 637/TASK 53-21-00-991-044)

 (1)
 Do a detailed inspection on the structure of the circumferential joint at FR35 and between left and right STGR10.

 (2)
 Make sure that there is no :

 (a)
 Corrosion damage :

 -If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types of corrosion, inspection, removal and corrosion protection.

 (b)
 Other damage (cracks, scratches, stress, marks, dents, bumps,...).

 Circumferential Joint at FR35 Figure 637/TASK 53-21-00-991-044 
R  EFF :  151-199, 401-499,  53-21-00 Page A698 Aug 01/05
 CES 

 -If you find this type of damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
 5. Close-up
________
 Subtask 53-21-00-942-081
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the access platform(s).

R  **ON A/C 301-399, 
R  TASK 53-21-00-210-015 
R  General Visual Inspection of Fuselage Skin Around Forward Emergency Exit Skin 
R  Cutout between FR 35 and FR 35.3 and from Stringer 8 to Stringer 23 External... 
R  1. Reason for the Job__________________ 
R  Refer to the MPD TASK: 532152-01 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific access platform 3.2 m (10 ft. 6 in.) 
R  B. Consumable Materials 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  Material No. 11-004 USA MIL-T-81533 
R  1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) 
R  (Ref. 20-31-00) 
R  Material No. 19-003 USA AMS 3819 
R  LINT-FREE COTTON CLOTH (Ref. 20-31-00) 
R  C. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  SRM 511100 P.Block 001 (for corrective action) 
R  SRM 512200 P.Block 001 (for corrective action) 
R  53-21-00-991-062 Fig. 638

 CES  CES

R  3. Job Set-up__________ 
R  Subtask 53-21-00-010-103 
R  A. Get Access 
R  (1) Put an access platform in position at zone 231 (232). 
R  Subtask 53-21-00-110-112 
R  B. Cleaning of the Structure 
R  WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ 
R  MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. 
R  OBEY THE MANUFACTURERS INSTRUCTIONS. 
R  PUT ON PROTECTIVE CLOTHING. 
R  DO NOT GET THEM IN YOUR MOUTH. 
R  DO NOT SMOKE. 
R  DO NOT BREATHE THE GAS. 
R  THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. 
R  GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED. 
R  (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) 
R  and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(26)