曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Number Name/Location
324DL Trailing Edge Access
E. Prepare for the Removal
SUBTASK 27-21-91-860-031-002
(1) Do this task: Remove Pressure from the Rudder Hydraulic Systems A, B, and Standby,
TASK 27-21-00-800-802.
SUBTASK 27-21-91-860-032-002
(2) Open these circuit breakers and install safety tags:
CAPT Electrical System Panel, P18-1
Row Col Number Name
C 7 C00285 YAW DAMPER AC
D 6 C01354 YAW DAMPER 2 DC
D 7 C00286 YAW DAMPER 1 DC
SUBTASK 27-21-91-010-009-002
(3) To get access to the main rudder pcu installation [1], do this step:
Remove this access panel:
Number Name/Location
324DL Trailing Edge Access
F. Solenoid Valve Removal
SUBTASK 27-21-91-020-033-002
(1) Do these steps to remove the solenoid valve [71]:
(a) Remove the bolts [72] that attach the solenoid valve [71] to the main rudder [1].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN 006-099, 101-122; GUN 001-005, 155-157, 201-999
POST SB 737-27-1253
27-21-91
Config 2
Page 412
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(b) Remove the seal plate [73].
(c) Remove the O-ring [74]. Discard the O-ring [74].
(d) Remove the solenoid valve [71].
(e) Put plugs on the main rudder PCU ports.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN 006-099, 101-122; GUN 001-005, 155-157, 201-999
POST SB 737-27-1253
27-21-91
Config 2
Page 413
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Main Rudder PCU Load Limiter Solenoid Valve Installation
Figure 403 (Sheet 1 of 2)/27-21-91-990-810-002
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN 006-099, 101-122; GUN 001-005, 155-157, 201-999
POST SB 737-27-1253
27-21-91
Config 2
Page 414
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Main Rudder PCU Load Limiter Solenoid Valve Installation
Figure 403 (Sheet 2 of 2)/27-21-91-990-810-002
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN 006-099, 101-122; GUN 001-005, 155-157, 201-999
POST SB 737-27-1253
27-21-91
Config 2
Page 415
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-21-91-400-806-002
5. Main Rudder PCU Load Limiter Solenoid Valve Installation
(Figure 403)
A. References
Reference Title
27-21-00-800-802 Remove Pressure from the Rudder Hydraulic Systems A, B, and
Standby (P/B 201)
27-21-00-840-802 Put the Rudder Systems A, B, and Standby Back to the Condition
Before the Pressure Removal (P/B 201)
B. Consumable Materials
Reference Description Specification
D00153 Fluid - Hydraulic, Erosion Arresting, Fire Resistant BMS3-11, Type
IV
(interchange~
able&
intermixable
with Type V)
C. Location Zones
Zone Area
211 Flight Compartment - Left
324 Vertical Fin - Rear Spar To Trailing Edge
D. Access Panels
Number Name/Location
324DL Trailing Edge Access
E. Prepare for the Installation
SUBTASK 27-21-91-860-033-002
(1) Make sure you remove pressure from the rudder hydraulic systems A and B. To remove it, do
this task: Remove Pressure from the Rudder Hydraulic Systems A, B, and Standby,
TASK 27-21-00-800-802.
F. Solenoid Valve Installation
SUBTASK 27-21-91-020-034-002
(1) Do these steps to install the solenoid valve [71]:
(a) Remove the plugs on the main rudder PCU ports.
(b) Clean the seal plate [73].
(c) Lubricate the new O-ring [74] with fluid, D00153.
(d) Install the new O-ring [74].
(e) Install the seal plate [73].
(f) Install the solenoid valve [71].
(g) Install the bolts [72] that attach the solenoid valve [71] to the main rudder PCU.
(h) Tighten the bolts [72] to 50-70 pound-inches (5.6-7.9 newton-meters).
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN 006-099, 101-122; GUN 001-005, 155-157, 201-999
POST SB 737-27-1253
27-21-91
Config 2
Page 416
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-21-91-860-034-002
(2) Do this task: Put the Rudder Systems A, B, and Standby Back to the Condition Before the
Pressure Removal, TASK 27-21-00-840-802.
SUBTASK 27-21-91-860-035-002
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊2(119)