曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

SUBTASK 27-11-51-210-002
(2) Make sure the fork is correctly engaged to the paddle on the control column.
SUBTASK 27-11-51-420-001
(3) Install the control wheel drum assembly [19]:
(a) Connect the cable AA [4] and cable AB [6] to the control wheel drum assembly [19].
(b) Put the end of cable ACBA [1] and cable ACBB [2] through the openings, and at the same
time, put the control wheel drum assembly [19] in its position.
(c) Make sure the radius fillers [8] are bonded to the rib.
(d) Put the bracket [7] in its position with the FWD marking forward.
(e) Install the bracket [7] with the bolts [9], washers [10] and nuts [11].
(f) Install the bolts [12], washers [13], and nuts [14] to attach the control wheel drum
assembly [19] to the airplane structure.
(g) Attach the wiring harness [38] to the control wheel drum assembly [19] with the screws
[31], washers [32], and nuts [34].
(h) Connect the electrical connector [33] to the aileron transmitter.
(i) Connect the electrical connectors [15] and [30] to the roll force transducer [18].
(j) Install the clamps [26], [29] and [41] with screws [24], [27], and [39].
(k) Install the screw [35], and clamp [37] to attach the rudder pedal adjustment crank to the
control wheel drum assembly [19].
SUBTASK 27-11-51-420-002
(4) Install the cable guide [16] to the control wheel drum assembly [19]:
(a) Put the cable guide [16] in its position.
(b) Install the screws [17] on the cable guide [16].
SUBTASK 27-11-51-420-003
(5) Connect the cable AA [4] and cable AB [6] at the turnbuckles [5].
(a) Remove the identification tags from the disconnected cables.
(b) Connect the cable AA [4] and cable AB [6] at the turnbuckles [5].
(c) Tighten the turnbuckles [5] to remove slack but keep the cable tension at zero.
SUBTASK 27-11-51-420-004
(6) Connect the cable ACBA [1] and cable ACBB [2] at the turnbuckles [3]:
(a) Remove the identification tags from the disconnected cables.
(b) Connect the cable ACBA [1] and cable ACBB [2] at the turnbuckles [3].
(c) Tighten the turnbuckles [3] to remove slack but keep the cable tension at zero.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-51
Page 409
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-11-51-080-001
(7) Remove the rig pin A/S-1 and A/S-1A, from the rig pin kit, SPL-1585, from the aileron transfer
mechanism.
SUBTASK 27-11-51-080-002
(8) Remove the rig pin A/S-15, from the rig pin kit, SPL-1585, from the aileron trim mechanism.
SUBTASK 27-11-51-860-003
(9) Do this task: Put the Aileron Hydraulic Systems A and B Back to the Condition Before
Pressure Removal, TASK 27-11-00-860-802.
SUBTASK 27-11-51-820-001
(10) Adjust cables ACBA and ACBB and cables AA and AB. To adjust the cables, do this task:
Aileron Cables Adjustment, TASK 27-11-00-820-801.
SUBTASK 27-11-51-720-001
(11) Do this task: First Officer’s Control Wheel Lost Motion Test, TASK 27-11-00-700-802.
SUBTASK 27-11-51-730-001
(12) Do this task: Manual Reversion Control Friction Test, TASK 27-11-00-700-803.
SUBTASK 27-11-51-710-001
(13) Do this task: Aileron Response (Operational) Test, TASK 27-11-00-710-801.
SUBTASK 27-11-51-720-002
(14) Do this task: Control Wheel Centering Check, TASK 27-11-00-700-804.
SUBTASK 27-11-51-720-003
(15) Do this task: Aileron Control Wheel Force Test, TASK 27-11-00-700-805.
SUBTASK 27-11-51-720-004
(16) Do this task: Control Wheel Travel Stop Test, TASK 27-11-00-700-807.
SUBTASK 27-11-51-710-002
(17) Do this task: Roll Force Transducer Test, TASK 22-11-11-740-801.
SUBTASK 27-11-51-410-001
(18) Close this access panel:
Number Name/Location
112A Forward Access Door
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-51
Page 410
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
AILERON TRIM ACTUATOR - REMOVAL/INSTALLATION
1. General
A. This procedure has these tasks:
(1) A removal of the aileron trim actuator
(2) An installation of the aileron trim actuator.
TASK 27-11-54-000-801
2. Aileron Trim Actuator Removal
(Figure 401)
A. References
Reference Title
27-11-00-860-801 Remove Pressure from the Aileron Hydraulic Systems A and B
(P/B 201)
B. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊2(3)