曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Page 205
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(b) Disconnect the electrical connector from the standby flight controls shutoff valve at the
standby flight controls hydraulic module.
(c) Put the manual override lever at the flight control A and B shutoff valves in the position 2
(OFF position). Leave the Standby valve in the position 1 (OFF position).
NOTE: In normal condition, the A and B valves are in position 1 (ON position) and the
Standby valve is in position 1 (OFF position).
(d) Install the lock, SPL-1675 or lock, SPL-1676 on the three flight controls shutoff valves.
1) Install the lockpins.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-00
Page 206
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Flight Controls Hydraulic Module Lock Installation
Figure 202 (Sheet 1 of 3)/27-21-00-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-00
Page 207
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Flight Controls Hydraulic Module Lock Installation
Figure 202 (Sheet 2 of 3)/27-21-00-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-00
Page 208
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Flight Controls Hydraulic Module Lock Installation
Figure 202 (Sheet 3 of 3)/27-21-00-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-00
Page 209
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Standby Flight Controls Hydraulic Module Lock Installation
Figure 203 (Sheet 1 of 2)/27-21-00-990-803
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-00
Page 210
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Standby Flight Controls Hydraulic Module Lock Installation
Figure 203 (Sheet 2 of 2)/27-21-00-990-803
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-00
Page 211
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-21-00-840-802
5. Put the Rudder Systems A, B, and Standby Back to the Condition Before the Pressure Removal
(Figure 201, Figure 202, Figure 203)
A. References
Reference Title
12-12-00-610-801 Hydraulic Reservoir Servicing (P/B 301)
SWPM 20-60-03 Standard Wiring Practices Manual
B. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
SPL-1675 Assembly - Lock, Flight Controls
(Part #: F80049-18, Supplier: 81205, A/P Effectivity: 737-100, -200,
-200C, -300, -400, -500, -600, -700, -700C, -700ER, -700QC, -800, -900,
-900ER, -BBJ)
(Opt Part #: F80049-12, Supplier: 81205, A/P Effectivity: 737-100, -200,
-200C, -300, -400, -500, -600, -700, -700C, -700ER, -700QC, -800, -900,
-900ER, -BBJ)
SPL-1676 Assembly - Lock, Flight Controls
(Part #: F80049-17, Supplier: 81205, A/P Effectivity: 737-100, -200,
-200C, -300, -400, -500, -600, -700, -700C, -700ER, -700QC, -800, -900,
-900ER, -BBJ)
C. Consumable Materials
Reference Description Specification
G50171 Compound - Corrosion Inhibiting Compound,
Interior Application - D5026NS or ZC-026
D. Location Zones
Zone Area
133 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Left
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
210 Subzone - Control Compartment - Body Station 178.00 to Body
Station 259.50
E. Procedure
SUBTASK 27-21-00-080-002
(1) Remove the flight control ground locks from the flight control shutoff valves (Figure 202,
Figure 203):
(a) Remove the lockpins.
(b) Remove the lock, SPL-1675 or lock, SPL-1676 from the three flight controls shutoff valves.
(c) Put the manual override lever at the three flight controls shutoff valves A and B in the
position 1 (ON position).
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機(jī)維護(hù)手冊2(19)