A. Energize the ground service network
(Ref. TASK 24-42-00-861-001).
4. Procedure
_________
Subtask 25-65-00-010-054
A. Aircraft Procedure
(1) Remove the ELT (Ref. TASK 25-65-35-000-001).
Subtask 25-65-00-960-050-A
B. Workshop Procedure
(1)
Refer to the Manufacturers Component Maintenance Manual (CMM) for the correct procedures.
(2)
If you install the ELT in a different aircraft, or the aircraft registration code/number (ICAO) has changed:
-Program the ELT, if programming equipment is available.
-Or, refer to (Ref. TASK 25-65-00-840-001), if programming equipment is not available.
Subtask 25-65-00-410-055
C. Aircraft Procedure
(1) Install the ELT (Ref. TASK 25-65-35-400-001).
5. Close-up
________ Subtask 25-65-00-862-053
A. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
ANTENNA - EMERGENCY LOCATOR, AIRCRAFT (112MX) - REMOVAL/INSTALLATION
____________________________________________________________________ TASK 25-65-14-000-001 Antenna 112MX (Emergency Locator Transmitter) - Removal
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps No specific nonmetallic scraper No specific access platform 6 m (19 ft. 8 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-65-14-991-001 Fig. 401
3. Job Set-up
__________ Subtask 25-65-14-941-050
A. Get access to the Antenna 112MX
(1) Put the access platform in position at the antenna.
4. Procedure
_________ Subtask 25-65-14-020-051
A. Removal of the Antenna 112MX
(Ref. Fig. 401/TASK 25-65-14-991-001)
(1) Remove the sealants from the heads of the screws (1) with a nonmetallic scraper.
R EFF : 102-149, 151-199, 201-299, 301-399, 25-65-14Page 401 401-499, Aug 01/05
CES
Antenna 112MX Figure 401/TASK 25-65-14-991-001
R EFF : 102-149, 151-199, 201-299, 301-399, 401-499, 25-65-14 Page 402 Aug 01/05
CES
(2)
Remove the screws (1).
(3)
Lift the antenna (2) carefully away from the fuselage outer skin, and disconnect the connector (3) from the antenna (2).
(4)
Remove the antenna (2).
(5)
Put blanking caps on the disconnected electrical connectors.
(6)
Remove and retain the O-ring seal (4).
R EFF : 102-149, 151-199, 201-299, 301-399, 25-65-14Page 403 401-499, Aug 01/05
CES TASK 25-65-14-400-001
Antenna 112MX (Emergency Locator Transmitter) - Installation
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific masking tape No specific nonmetallic scraper No specific access platform 6 m (19 ft. 8 in.) No specific Torque Wrench : range 0.00 to 1.20 m.daN
(0.00 to 9.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-013 D TV-53-3507/73 RELEASE AGENT (OBSOLETE USE 05-013A) (Ref. 20-31-00)
Material No. 07-001B ELECTRICAL BONDING COATING (BLUE COLOR) (Ref. 20-31-00)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備4(157)
