A. Install the inflation reservoir of the offwing escape slide (Ref. TASK 25-62-46-400-001).
R  EFF : 001-049, 051-099, 101-149, 151-199, 25-62-00Page 612 201-299, 401-499, Aug 01/05
 CES  CES  SLIDE - ESCAPE, OFFWING (7504MM,7505MM) - REMOVAL/INSTALLATION

R  **ON A/C 301-399, 
R  TASK 25-62-00-750-003 
R  Hydrostatic Test of Door 2/3 Escape-Slide Inflation Reservoir 
R  1. Reason for the Job__________________ 
R  Refer to the MPD TASK: 256249-01 
R  2. Job Set-up Information______________________ 
R  A. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------
R  25-62-49-000-001  Inflation Reservoir, Escape-Slide - Removal 
R  25-62-49-400-001  Inflation Reservoir, Escape-Slide - Installation 
R  CMM  256521 
R  3. Job Set-up__________ 
R  Subtask 25-62-00-020-055 
R  A. Remove the inflation reservoir for the door 2/3 escape slide (Ref. TASK 
R  25-62-49-000-001). 
R  4. Procedure_________ 
R  Subtask 25-62-00-750-052 
R  A. Do the hydrostatic test of the inflation reservoir for the door 2/3 
R  escape slide (Ref. CMM 256521). 
R  5. Close-up________ 
R  Subtask 25-62-00-420-055 
R  A. Install the inflation reservoir for the door 2/3 escape slide (Ref. TASK 
R  25-62-49-400-001).

______________________________________________________________
 TASK 25-62-42-000-002
 Offwing Escape-Slide - Removal after Inflation
 1. Reason for the Job
__________________
 Self Explanatory.
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps No specific blanking plugs No specific warning notce No specific access platform 2.5 m (8 ft. 2 in.) 98D27803000000 1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-62-42-400-001 Offwing Escape-Slide - Installation 25-62-46-000-001 Inflation Reservoir, Offwing Escape-Slide - Removal 25-62-46-400-001 Inflation Reservoir, Offwing Escape-Slide -
Installation 27-50-00-866-009 Retraction of the Flaps on the Ground 25-62-42-991-004 Fig. 401 25-62-42-991-005 Fig. 402
R  EFF : 001-049, 051-099, 101-149, 151-199, 25-62-42Page 401 201-299, 401-499, Aug 01/05
 CES  3. Job Set-up

__________
 Subtask 25-62-42-481-051

 A. Safety Precautions before Removal
 (1) In the cockpit: WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION
_______ BEFORE YOU START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 (a)
 set the the flap/slat control lever to the 0 position (Ref. TASK 27-50-00-866-009),

 (b)
 install the LOCKING TOOL - FLAP/SLAT CONTROL LEVER (98D27803000000) on the flap/slat control lever when you work near the flaps,

 (c)
 put a warning notce in position on the flap/slat control lever to tell persons not to operate the flaps.

 Subtask 25-62-42-941-054
 B. Access to the Inflated Offwing Escape Slide
 (1) Put the access platform in position: R (a) FOR 7504MM
 -at the escape slide enclosure 193AT, R (b) FOR 7505MM
 -at the escape slide enclosure 194AT,
 4. Procedure
_________
 Subtask 25-62-42-020-051

 A. Removal of the Offwing Escape Slide Assembly, 7504MM (7507MM)
 (Ref. Fig. 401/TASK 25-62-42-991-004)

 CAUTION : KEEP OFF THE INFLATED ESCAPE-SLIDE. IF YOU GO ON IT, YOU CAN
_______
 CAUSE DAMAGE TO THE SURFACE MATERIAL.

R  EFF : 001-049, 051-099, 101-149, 151-199, 25-62-42Page 402 201-299, 401-499, Aug 01/05
 CES

 (1)
 Deflate the offwing escape slide (15):
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備4(80)