(b)
Put the tie-down point (8) in position at the plug housing (9).
(c)
Install the screws (7) and the nuts (10).
(3) Install the seat-track sections (12): NOTE : The installation procedure for all the seat-track sections
____ (12) is the same. Therefore, the installation procedure for one seat-track section (12) only is given here.
(a)
Put the seat-track section (12) in position at the structure (3).
(b)
Install the screws (11) and the nuts (13).
(4) Install the tie-down fittings (15): NOTE : The installation procedure for all the tie-down fittings (15)
____ is the same. Therefore, the installation procedure for one tie-down fitting (15) only is given here.
(a)
Put the tie-down fitting (15) in position at the structure (3).
(b)
Install the screws (14) and the nuts (16).
(5) Install the tie-down fittings (18): NOTE : The installation procedure for all the tie-down fittings (18)
____ is the same. Therefore, the installation procedure for one tie-down fitting (18) only is given here.
(a)
Put the tie-down fitting (18) in position at the structure (3).
(b)
Install the screws (17) and the nuts (19).
(6)
Install the tie-down fitting (21):
(a)
Put the tie-down fitting (21) in position at the structure (3).
(b)
Install the screws (20) and the nuts (22).
(7)
Install the tie-down fittings (24): NOTE : The installation procedure for all the tie-down fittings (24)
____ is the same. Therefore, the installation procedure for one tie-down fitting (24) only is given here.
(a)
Put the tie-down fitting (24) in position at the structure (3).
(b)
Install the screws (23) and the nuts (25).
(8)
Install the tie-down fitting (27):
(a)
Put the tie-down fitting (27) in position at the structure (3).
(b)
Install the screws (26) and the nuts (28).
(9)
Install the tie-down fitting (30):
(a)
Put the tie-down fitting (30) in position at the structure (3).
(b)
Install the screws (29) and the nuts (31).
(10) Install the cargo net(s) (5), if removed:
(a) Put the cargo net(s) (5) in position at the applicable net attachment fittings of the cargo-compartment floor and ceiling areas.
(b) Connect the net fittings (6) to the net attachment fittings. R **ON A/C 062-099, 106-149, 151-199, 203-299, 401-499,
Subtask 25-55-41-420-050-A
B. Installation of the Tie-Down and Net Attachment Fittings in the Floor Area of the AFT Cargo-Compartment
**ON A/C 062-099, 106-149, 203-299,
(Ref. Fig. 401/TASK 25-55-41-991-001) R **ON A/C 151-199, 401-499,
(Ref. Fig. 401A/TASK 25-55-41-991-001-A) R **ON A/C 062-099, 106-149, 151-199, 203-299, 401-499,
(1) Install the tie-down points (2): NOTE : The installation procedure for all the tie-down points (2) is
____ the same. Therefore, the installation procedure for one tie-down point (2) only is given here.
(a)
Put the tie-down point (2) in position at the structure (3).
(b)
Install the screws (1) and the nuts (4).
(2) Install the tie-down points (8): NOTE : The installation procedure for all the tie-down points (8) is
____ the same. Therefore, the installation procedure for one tie-down point (8) only is given here.
(a) Put the plug housing (9) in position at the structure (3), if removed.
R EFF : 001-049, 051-099, 101-149, 151-199, 25-55-41Page 447 201-299, 401-499, Aug 01/05
CES
(b)
Put the tie-down point (8) in position at the plug housing (9).
(c)
Install the screws (7) and the nuts (10).
(3) Install the seat-track sections (12): NOTE : The installation procedure for all the seat-track sections
____ (12) is the same. Therefore, the installation procedure for one seat-track section (12) only is given here.
(a)
Put the seat-track section (12) in position at the structure (3).
(b)
Install the screws (11) and the nuts (13).
(4) Install the tie-down fittings (15): NOTE : The installation procedure for all the tie-down fittings (15)
____ is the same. Therefore, the installation procedure for one tie-down fitting (15) only is given here.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備4(50)
