(1)
Make sure the ground service is energized (Ref. TASK 24-42-00-861-001).
(2)
Make sure that the AFT cargo-compartment door is open (Ref. TASK 52-30-00-860-001).
R EFF : 001-049, 051-099, 101-149, 151-199, 25-62-00Page 204 201-299, 401-499, Aug 01/05
CES CES
(3) Make sure the access platform is in position adjacent to the AFT cargo-compartment exit.
(4) Make sure the AFT CARGO COMPT light switch 8LU is set to the ON position.
R (5) FOR 7506MM
(a) Make sure the access panel 151KW is removed.
R (6) FOR 7507MM
(a) Make sure the access panel 152KW is removed.
4. Procedure_________
Subtask 25-62-00-081-050
A. Removal of the Lockpin Assembly (3) (Ref. Fig. 201/TASK 25-62-00-991-003)
(1) Remove the lockpin assembly (3) from the valve/regulator assembly (4).
(2) Put the lockpin assembly (3) in the pocket (1).
5. Close-up________
Subtask 25-62-00-410-063
A. Close Access (Ref. Fig. 201/TASK 25-62-00-991-003)
(1) Make sure that the work area is clean and clear of tool(s) and other items.
R (2) FOR 7506MM
(a) Install the access panel 151KW.
R (3) FOR 7507MM
(a) Install the access panel 152KW.
(4) Set the AFT CARGO COMPT light switch 8LU to the OFF position.
(5) Remove the access platform(s).
(6)
Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
(7)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
Subtask 25-62-00-862-053
B. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
R EFF : 001-049, 051-099, 101-149, 151-199, 25-62-00Page 206 201-299, 401-499, Aug 01/05
CES TASK 25-62-00-820-001
Adjustment Procedure to Install the Lock pin in the Regulator Valve Assembly of the Inflation Reservoir - Offwing Escape-Slide
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific plastic sheet No specific safety barriers No specific 1 ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE No specific 1 ALLEN KEY 3/16 IN No specific 3 WARNING NOTICE 98D27803000000 2 LOCKING TOOL - FLAP/SLAT CONTROL LEVER FOR FIN 7507MM No specific 1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE No specific 1 MIRROR - INSPECTION, FLEXIBLE
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-069 TACKY TAPE (Ref. 20-31-00) Material No. 05-109 D DAN 493 LAMINATE, A/C INTERIOR (Ref. 20-31-00)
R EFF : 001-049, 051-099, 101-149, 151-199, 25-62-00Page 207 201-299, 401-499, Aug 01/05
CES C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-50-00-866-009 Retraction of the Flaps on the Ground 25-62-00-991-004 Fig. 202 FOR FIN 7507MM 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump
3. Job Set-up
__________
Subtask 25-62-00-941-059
A. Safety Precautions and Wing Protection
NOTE : During this adjustment procedure an unwanted deployment can occur.
____ The safety precautions are necessary to prevent injury to personnel and damage to equipment, if an unwanted deployment occurs.
NOTE : We recommend that only personnel who know the system do this
____
procedure.
(1) Wing Protection Procedure:
CAUTION : MAKE SURE THAT THE PROTECTION IS IN POSITION ON THE UPPER
_______ SURFACE OF THE WING. DEPLOYMENT OF THE OFFWING ESCAPE-SLIDE CAN CAUSE DAMAGE TO THIS AREA.
(a) Do not use bubble wrap as protection for the aircraft wing.
NOTE : The protection is a laminate of fiberglass-reinforced
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備4(63)
