曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  - Or, if the gage (2) continues to show an incorrect indication, 
R  replace the escape-slide/slide raft pack-assembly and/or 
R  inflation reservoir (1). 
R  (d) Replace the ecsape-slide/slide raft pack-assembly and/or 
R  inflation reservoir (1) with these steps: 
R  1_  At the doors:
R  - Remove the escape-slide/slide raft pack-assembly (Ref. TASK 
R  25-62-44-000-002). 
R  - Install a new escape-slide/slide raft pack-assembly 
R  (Ref. TASK 25-62-44-400-001). 
R  2_  And at one of the two other applicable locations:
R  - Remove the inflation reservoir (1) (Ref. TASK 25-62-49-000-
R  001). 
R  - Install the inflation reservoir (1) (Ref. TASK 25-62-49-400-
R  001).

 

 **ON A/C ALL
 5. Close-up
________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 Subtask 25-62-00-410-050
 A. Close Access
 (Ref. Fig. 601/TASK 25-62-00-991-001)

 (1) Make sure that the work area is clean and clear of tool(s) and other items.
R (2) FOR 7506MM
 (a) Install the access panel 151KW. R (3) FOR 7507MM
 (a) Install the access panel 152KW.
 (4)
 Set the AFT CARGO COMPT light switch 8LU to the OFF position.

 (5)
 Remove the access platform(s).

 (6) Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002). **ON A/C 301-399,
 Subtask 25-62-00-410-050-A
 A. Close Access
 (Ref. Fig. 601A/TASK 25-62-00-991-001-A)

 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Do one of the two applicable steps:

 -Close the door of the overhead stowage compartment.
 -Or, close the access door (7) and push the quick-release fasteners
 (6) to lock the door (7).
 EFF : ALL
25-62-00Page 609

R R  (3) Remove the ground support and maintenance equipment, the special and standard tools and all other items. 
R  **ON A/C ALL
 Subtask 25-62-00-862-056
 B. De-energize the ground service network (Ref. TASK 24-42-00-862-001).

 EFF : ALL
25-62-00Page 610

 TASK 25-62-00-750-001
 Hydrostatic Test of the Escape-Slide/Slide Raft Inflation-Reservoir

 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: 256241-02

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 25-62-44-000-002 Removal of the Escape-Slide Pack-Assembly R 25-62-44-400-001 Installation of the Escape-Slide Pack-Assembly CMM 256517
 3. Job Set-up
__________
 Subtask 25-62-00-020-052

 A. Remove the escape slide/escape slide (raft) pack-assembly (Ref. TASK 25-62-44-000-002).
 4. Procedure
_________
 Subtask 25-62-00-750-050

 A. Do the hydrostatic test of the inflation reservoir (Ref. CMM 256517).
 5. Close-up
________
 Subtask 25-62-00-420-052

 A. Install the escape slide/escape slide (raft) pack-assembly (Ref. TASK 25-62-44-400-001).
 EFF : ALL
25-62-00Page 611

R  **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 TASK 25-62-00-750-002
 Hydrostatic Test of the Offwing Escape-Slide Inflation Reservoir

 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: 256242-01

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-62-46-000-001 Inflation Reservoir, Offwing Escape-Slide - Removal 25-62-46-400-001 Inflation Reservoir, Offwing Escape-Slide -Installation CMM 256517
 3. Job Set-up
__________
 Subtask 25-62-00-020-053

 A. Remove the inflation reservoir of the offwing escape slide (Ref. TASK 25-62-46-000-001).
 4. Procedure
_________
 Subtask 25-62-00-750-051

 A. Do the hydrostatic test of the inflation reservoir of the offwing escape slide (Ref. CMM 256517).
 5. Close-up
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備4(79)