____ the same. Therefore, the installation procedure for one tie-down point (10) only is given here.
 (a)
 If removed, put the plug housing (11) in position at the structure (3).

 (b)
 Put the tie-down point (10) in position at the plug housing (11).

R  (c) For the tie-down points (10) installed between FR35 and FR35.4: 
R  1_  Install the screws (9) and the nuts (12).
R  (d) For the tie-down points (10) installed at all other frame 
R  positions: 
R  1_  Install the screws (9) in the tie-down point (10).
R  (4) Install the tie-down fittings (14): 
R  NOTE : The installation procedure for all the tie-down fittings (14)____ 
R  is the same. Therefore, the installation procedure for one 
R  tie-down fitting (14) only is given here. 
R  (a) Put the tie-down fitting (14) in position at the structure (3). 
R  (b) Install the screws (13) in the tie-down fitting (14). 
R  (5) Install the tie-down fitting (16): 
R  (a) Put the tie-down fitting (16) in position at the structure (3). 
R  (b) Install the screws (15) in the tie-down fitting (16). 
R  (6) Install the tie-down fittings (18): 
R  NOTE : The installation procedure for all the tie-down fittings (18)____ 
R  is the same. Therefore, the installation procedure for one 
R  tie-down fitting (18) only is given here. 
R  (a) Put the tie-down fitting (18) in position at the structure (3). 
R  (b) Install the screws (17) in the tie-down fitting (18). 
R  (7) Install the cargo net(s) (7), if removed: 
R  (a) Put the cargo net(s) (7) in position at the applicable net 
R  attachment fittings of the cargo-compartment floor and ceiling 
R  areas. 
R  (b) Connect the net fittings (8) to the net attachment fittings.

 **ON A/C ALL
 Subtask 25-54-41-420-051
 C. Installation of the Tie-Down and Net Attachment Fittings in the Ceiling Area
 **ON A/C 001-049, 051-099, 101-149, 201-299,
 (Ref. Fig. 402/TASK 25-54-41-991-002) R **ON A/C 151-199, 401-499,
 (Ref. Fig. 402A/TASK 25-54-41-991-002-A)
 **ON A/C 301-399,

 (Ref. Fig. 402B/TASK 25-54-41-991-002-B)
 **ON A/C ALL

 (1)
 Install the stanchion fitting (2):

 (a)
 Put the stanchion fitting (2) in position at the structure (1).

 (b)
 Install the screws (3) in the stanchion fitting (2).

 (2)
 Install the tie-down points (4): NOTE : The installation procedure for all the tie-down points (4) is

____ the same. Therefore, the installation procedure for one tie-down point (4) only is given here.
 (a)
 Put the tie-down point (4) in position at the structure (1).

 (b)
 Install the screws (5) in the tie-down point (4).

 (3) Install the tie-down points (9): NOTE : The installation procedure for all the tie-down points (9) is
____ the same. Therefore, the installation procedure for one tie-down point (9) only is given here.
 EFF : ALL
25-54-41Page 424

 (a) Install the spacer (8), if removed:
 1 Put the spacer (8) in position at the structure (1).
_
 2 Install the screws (11) in the spacer (8).
_
 (b)
 Put the tie-down point (9) in position at the spacer (8).

 (c)
 Install the screws (10) in the tie-down point (9).

 (4) Install the cargo net(s) (7), if removed:
 (a)
 Put the cargo net(s) (7) in position at the applicable net attachment fittings of the cargo-compartment floor and ceiling areas.

 (b)
 Connect the net fittings (6) to the net attachment fittings.

 Subtask 25-54-41-390-050
 D. Application of Sealants
 (Ref. Fig. 403/TASK 25-54-41-991-003)

 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE SPECIAL
_______
 MATERIAL.
 THIS MATERIAL IS DANGEROUS.

 (1) For the tie-down and net attachment fittings installed in a closed cutout:
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設(shè)備4(16)