(3)
 Remove the masking paper or the masking tape.

 5. Close-up
________ Subtask 52-33-11-410-065
 A. Close Access
 (1)
 Install the lining and insulation on the Bulk door (Ref. TASK 52-33-13-400-001).

 (2)
 Install the door net in the Bulk door area and close the Bulk door (Ref. TASK 52-30-00-860-008).

 (3)
 Remove the access platform(s).

R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-11Page 609 1224-224, 228-228, 1May 01/05 1 1 1CES 1 TASK 52-33-11-200-003

 Detailed Visual Inspection of the Internal Bulk Cargo Compartment Door
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 523303-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform/2.30/m No specific lint-free cloth No specific masking paper No specific masking tape
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-002  USA MIL-PRF-680 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) (Ref. 20-31-00)
 Material No. 15-005  AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 15-006  AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-11Page 610 1224-224, 228-228, 1May 01/05 1 1 1CES 1

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-006 Open the Bulk Cargo-Compartment Door 52-30-00-860-008 Close the Bulk Cargo-Compartment Door 52-33-13-000-001 Removal of the Lining and Insulation of the Bulk
 Cargo-Compartment Door 52-33-13-400-001 Installation of the Lining and Insulation of the Bulk
 Cargo-Compartment Door SRM 51-73-00 SRM 51-74-00 SRM 52-30-00 SRM 52-73-00
 3. Job Set-up
__________
 Subtask 52-33-11-010-065
 A. Get Access
 (1)
 Put the access platform/2.30/m in position below the Bulk cargo-compartment door (referred to as Bulk door).

 (2)
 Open the Bulk door (Ref. TASK 52-30-00-860-006).

 (3)
 Remove the lining and insulation of the Bulk door (Ref. TASK 52-33-13-000-001).

 4. Procedure
_________
 Subtask 52-33-11-615-051
 A. Cleaning Procedure
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-11Page 611 1224-224, 228-228, 1May 01/05 1 1 1CES 1 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE SPECIAL

_______
 MATERIAL.
 THIS MATERIAL IS DANGEROUS.

 (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-002) and a lint-free cloth .
 Subtask 52-33-11-210-064
 B. Detailed Visual Inspection of the Internal Structure of the Bulk Cargo Door
 (1) Examine the inner side of the outer skin, the inner skin, horizontal beams and vertical spars for subsequent damage.
 (a) If you find a scratch,
 -determine the extent of the damaged area, (Ref. SRM 52-30-00)
 -remove the damage when it is less than the limit (Ref. SRM 51-73-00).
 NOTE : When the scratch is larger than the limit, repair the
____ affected component (Ref. SRM 52-30-00).
 (b) If you find a dent,
 -determine the extent of the damaged area (Ref. SRM 52-30-00),
 -remove the damage when it is less than the limit (Ref. SRM 52-73-00).
 NOTE : When the dent is larger than the limit, repair the
____ affected component (Ref. SRM 52-30-00).
 (c) If you find corrosion,
 -determine the extent of the corroded area (Ref. SRM 52-30-00),
 -remove the damage when it is less than the limit (Ref. SRM 51-74-00).
 NOTE : When the corroded area is larger than the limit, repair
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門6(45)